Part Location Diagram of 143684-01 DeWALT Spool
See part 18 in the diagram
Replacing your Black and Decker Trimmer Spool
( Grid squares measure 1x1 inch )

Spool 143684-01

Manufactured by:
DeWALT
ERP Number:
ERP10165961
Part Number:
143684-01
Original Equipment Manufacturer ?
  Works with your model  82300!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(30 rated repairs) ?
  Works with your model   82300!

Product Description

?

Genuine Dewalt replacement part, it is sold individually. This is the spool that contains the cutting line for the trimmers shown below. It includes 20 feet of cutting line. When replacing the cutting line use .065 diameter line.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Black and Decker
  • Craftsman
This part works with the following products:
  • Trimmer
Part# 143684-01 replaces these:
  • 143684-01
  • P143684-01

Videos For installing this part.

?
Replacing your Spool

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(10 Reviews)
Click to filter by ratings:
  • 5 stars
    8
  • 4 stars
    2
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
NEED LINE SPOOL FOR THIS MODEL. DON'T KNOW AGE OF TRIMMER. IS THIS PART STILL AVALIABLE?
Joe For model number ST 4500 TYP3 - December 9, 2022

Hello Joe, thank you for your question. For Model Black and Decker ST4500, the correct Spool is part 143684-01. Good luck with this repair

eReplacementParts Team
December 9, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(30 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bumper cap broke due to age

MARK from DAVIE, Florida

12 of 12 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
682378-02, 143684-01
Pop the old one off. And replace the new parts. Very easy to complete.
Did you find this story helpful?
Thank you for voting!

Change the cutter line

HUMBERTO from NOGALES, Arizona

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
143684-01
Remove the the bumper cap by pressing the two tabs on the side, Remove spring and old spool. Replace spool and spring, line up tabs to inserts on spool housing and snap it in.
Did you find this story helpful?
Thank you for voting!

Broken hub and lost spool

Jerry from Louisville, Kentucky

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
682378-02, 682235-00, 143684-01
Placed the new spring on the new spool and inserted spool into spool cover with 4 or 5 inches of line coming out. Then pressed on the new cap.
Did you find this story helpful?
Thank you for voting!

Spool is damaged.

Peter from Peaks Island, Maine

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
143684-01
Simply replaced spool.
Did you find this story helpful?
Thank you for voting!

Replace worn spool & bump cap

Timothy from tyrone, Georgia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
682378-02, 143684-01
Depress the tabs on the side of the cap to release it, and pull it out. Remove the old spool. Take a few inches of the cutting line and thread it thru the spool housing. Place the spring on the spool and press them in. Then line up the tabs on the new cap, to the holes in the spool housing and press it in.
Did you find this story helpful?
Thank you for voting!

bump cap broke

ROGELIO from KAPOLEI, Hawaii

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
682378-02, 143684-01
Remove the parts to be replaced, install spool, then align cap tabs with the tabs on each side in the spool housing and snap into place.
Did you find this story helpful?
Thank you for voting!

I converted my fairly new non bump head auto feed trimmer to a bump head which works much better

Wayne from Lincoln, Nebraska

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
I pried off the old auto feed head and installed the new bump head. I split the motor housing and stood the motor on a solid surface so I could drive the replacement head on the shaft without risking damaging the motor bearings. All of the new parts were a perfect fit and it works well.
Did you find this story helpful?
Thank you for voting!

broken bumper

martin from hiawatha, Iowa

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Parts Used:
682378-02, 143684-01
Screwed the new spool into place and snapped in the bumper.
Did you find this story helpful?
Thank you for voting!

Bump cap and spool were worn out.

Daniel from Hollister, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
682378-02, 143684-01
Removed the old cap, the spool and replaced with the new ones.
Did you find this story helpful?
Thank you for voting!

Missing trimmer cap, needed more trimmer string.

Hattie from Setroit, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
682378-02, 143684-01
Replaced the bumper cap and added the new string spool.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP10165961
Manufacturer Part Number: 143684-01
Brand Model Number Description
Black and Decker 51312 Trimmer - String Trimmer
Craftsman 74104 Trimmer - Trimmer
Black and Decker 82300 Trimmer - 10 String Trimmer
Black and Decker 82310 Trimmer - 10 Bump Feed Weed Trimmer
Black and Decker 82310-04 Trimmer - 10 Bump Feed Trimmer
Black and Decker 82312 Trimmer - 12 Bump Feed Weed Trimmer
Black and Decker 82312-04 Trimmer - 12 Bump Feed Trimmer
Black and Decker CST500 Trimmer - 14.4 Volt String Trimmer
Black and Decker CST500-BDK Trimmer - 9" 14.4v String Trimmer-F
Black and Decker CST800 Trimmer - 12 Volt 8" Cordless String Trimmer
Black and Decker GE600 Trimmer - Groom N Edge
Black and Decker GE600-04 Trimmer - Groom N Edge
Black and Decker GL360-AR Trimmer - 350w Light Duty String Tr
Black and Decker GL360-B2 Trimmer - 350w Light Duty String Tr
Black and Decker GL360-B2C Trimmer - 350w Light Duty String Tr
Black and Decker GL360-B3 Trimmer - 350w Light Duty String Tr
Black and Decker GL360-BR Trimmer - 350w Light Duty String Tr
Black and Decker GL400-AR Trimmer - 10 St.Trimmer
Black and Decker GL400-B2 Trimmer - 10 St.Trimmer
Black and Decker GL400-B3 Trimmer - 10 St.Trimmer
Black and Decker GL400-BR Trimmer - 10 St.Trimmer
Black and Decker GL700N-AR Trimmer - 700w String Trimmer
Black and Decker ST1000 Trimmer - 9" Grass Trimmer
Black and Decker ST200 Trimmer - 10 String Trimmer
Black and Decker ST300 Trimmer - 10 String Trimmer
Black and Decker ST300-04 Trimmer - 10 String Trimmer
Black and Decker ST300-BDK Trimmer - 10in Strimmer
Black and Decker ST3000 Trimmer - 10 Groom-N-Edge
Black and Decker ST400 Trimmer - 12 Bump Feed String Trimmer
Black and Decker ST400-04 Trimmer - 12 String Trimmer