Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.
You will have to take the saw mostly apart for this repair, but parts cost a lot less than a new saw if you don\'t mind the repair work. Start by removing the blade, washers, and bolt. Remove the foot from the saw by removing the pivot screw/nut at the front and the adjustment bolt from the rear (remove the set screw on the lever, then th
... Read moree lever, then the nut and bolt. Remove the blade guard by removing the snap ring, stop button, and return spring. Remove the drive pud (what the blade bolts to) by removing the four retaining screws. Remove the blade housing by removing the screws from the backside. Remove the handle cover. Remove the white plastic cover behind the blade housing. Pull the armature out of the field coil (might have to tap on the back of the motor housing to get the bearing out of the bore, otherwise it\'s held in with magnetic force). Carefully remove the wiring from the handle for the cord, trigger, and light. Remove the field coil screws and the coil (turning the housing over and thumping it against a wood block with release it; it\'s pressure fit). Reinstall the field coil into the new motor housing (line up the screw holes and tap it in with a drift ot screwdriver until it seats). Reinstall the field coil screws. Carefully route the wiring through the guides in the housing. If the cord needs replacement now\'s a good time. The rest of reassembly is just the reverse of disassembly. Be sure to test the saw when done. These are relatively simple tools to repair, just take your time and snap some pictures if you need to.
Turned out the power cable was bad, went ahead and used new parts because the tool was 18 years old, was surprised they were available, repaired the cord pulling it out of boot, then sliding it back through the boot after finding the problem, parts were fast to come, and since it was a weekend and asked for expedited shipping they gave me
... Read more a partial discount! Love the graphics on website. Item I repaired was a Makita buffer. Thanks
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
