_WW_1.gif "Part Location Diagram of 22-18-0730 Milwaukee Carbon Brush")
Jump to:
Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead and brush spring attached. 2 of these brushes are need for the tools listed below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Brushes wore out
Dean from Randolph , Wisconsin
SWITCH FAILED CLOSED/ UNIT RAN ALL THE TIME
CHRIS from BAYFIELD, Colorado
switch went bad handle was cracked
Roy from Hastings, Michigan
Grinder would not shut off.
Steve from Albany, Ohio
motor brushes worn down
Doug from Richmond, Indiana
Brush wire broke
Tim from ELMORA, Pennsylvania
No power and it did not sound right
Lared from Mesa, Washington
Brushes were worn out
darrel from Pawtucket, Rhode Island
Brushes worn down more than half way
Chris from Napa, California
Worn out brushes.
Colin from Tampa, Florida
| Brand | Model Number | Description |
|---|---|---|
| Milwaukee | 5243 | Sander Grinder - Grinder |
| Milwaukee | 6052 | Sander Grinder - Grinder |
| Milwaukee | 6056 | Sander Polisher - 9" Sander/Grinder |
| Milwaukee | 6058 | Sander Polisher - 7" Sander/Grinder |
| Milwaukee | 6064 | Sander Polisher - 9" Sander/Grinder |
| Milwaukee | 6065 | Sander Polisher - Sander |
| Milwaukee | 6065-6 | Sander Polisher - Milwaukee 6065-6 Parts |
| Milwaukee | 6066 | Sander Polisher - Sander |
| Milwaukee | 6066-6 | Angle Grinder - Angle Grinder |
| Milwaukee | 6067 | Sander Grinder - 9" 5000 R.P.M. Grinder |
| Milwaukee | 6068 | Sander Polisher - Sander/Grinder |
| Milwaukee | 6070 | Sander Grinder - 7" 8000 R.P.M. Grinder |
| Milwaukee | 6090 | Sander Polisher - 7" Sander / Grinder |
| Milwaukee | 6095 | Sander Polisher - 9" 5,000 RPM Sander |
| Milwaukee | 6096 | Sander Polisher - 7" / 9" 6000 R.P.M. Sander |
| Milwaukee | 6098 | Sander Grinder - 7" 8000 R.P.M. Grinder |
| Milwaukee | 6106 | Sander Polisher - 9" Sander / Grinder |
| Milwaukee | 6108 | Sander Polisher - 9" Sander / Grinder |
| Milwaukee | 6115 | Sander Polisher - Sander/Grinder |
| Milwaukee | 6377 | Circular Saw - 7-1/4" Worm Drive Circular Saw |
| Milwaukee | 6377-2 | Saw - Milwaukee 6377-2-(620-1086) Parts |
| Milwaukee | 6378 | Circular Saw - 8-1/4" Worm Drive Circular Saw |
| Milwaukee | 6378-4 | Circular Saw - Worm Drive Circular Saw |
| Milwaukee | 6387 | Circular Saw - 7-1/4" Worm Drive Circular Saw |
| Milwaukee | 6388 | Circular Saw - Circular Saw |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-18-0730 Milwaukee Carbon Brush")
