This cord is an authentic Milwaukee replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. rnPower Cord Specifications: rn • 2 Prongs rn • 2 Wires rn • 18 Gauge rn • 8 Feet Long
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
worked as expected
Its a cord, went in with no surprises. Nice product and service
Guest - November 25, 2019
Verified Purchase
★★★★★
★★★★★
Perfect!
Parts are everything I expected. Why throw out an old tool when it can be repaired and continue its useful life?
Guest - November 27, 2020
Verified Purchase
★★★★★
★★★★★
Great item...worked well
A good fit via form as well as function:
No issues.
Guest - October 12, 2021
Verified Purchase
★★★★★
★★★★★
Works fine but required additional materials
Received promptly. Only issue was the spade connector and butt connector required. I had them so it was no issue. The next guy may not have them.
Robert - May 24, 2022
Verified Purchase
★★★★★
★★★★★
Replacement cord.
Excellent product, however it needed one 18 gauge flag connector to be installed correctly. It was impossible to find unless I wanted to buy 100. I did find a single on line for $4.65 plus nine dollars shipping, making it almost as expensive as the replacement cord. It would be nice to have the flag connector included with the cord.
Guest - September 9, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the handle half from the drill. Then removed the cord clamp. Removed the cord wires from the switch and removed the old cord. Then slid off the cord relief from the old cord and put it on the new cord. The installed the wires from the new cord into the switch, replaced the cord clamp, and installed the handle half.
Unscrewed the housing.
Remove the switch.
Disconnect the wires from the switch.
Remove and replace the brushes.
Put new fittings on the cord and attach to the switch.
Reposition the switch.
Reposition the housing and replace the screws.
Pretty simple two wire hook up. Did make one run to hardware store for a quick disconnect \"flag\" terminal (for white wire ) attachment and a \"cap style\" butt connector for black wire splice...I had used. Dremel tool with a small cut off whee/zingerl to slice/cut through old plastic cap style butt connector for black wire, rather th
... Read morean cut it shorter and make it easier to reconnect in its original length. Web site parts are excellent o.e.m. quality and should last another 20 year\'s!
After plastic jig saw covers removed.
Installed new cord & strain boot and used two electrical butt connectors to splice in New cord.
Fit perfectly just like the original, would definitely buy from this web site again
Remove the motor housing cover, remove the cord wires from the switch, and remove the old cord. Slide the cord protector from the old cord and put it on the new cord. Cut the wires to length to match up with the switch wires and connect them. I used butt connectors. Then replaced the motor cover.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-64-0215 Milwaukee Cord Set")
_WW_1.gif "Part Location Diagram of 22-64-0215 Milwaukee Cord Set")
