Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quick and On Time
Part replaced directly. Also, the entire assembly is only a little bit more than the the brushes on their own. Easy to replace.
Mark - August 19, 2019
Verified Purchase
★★★★★
★★★★★
Great fit
Second set I've bought. Fit perfect and easy to change
Guest - December 25, 2021
Verified Purchase
★★★★★
★★★★★
parts made easy
i have made several purchases from EReplacementParts. all have been successful. Great parts diagrams on line. Quick delivery and reasonable prices make the decision to repair o purchase a new tool easy.
Tim - November 17, 2023
Verified Purchase
★★★★★
★★★★★
Brush replacement
Great parts arrives quickly never a problem.
Guest - March 20, 2024
Verified Purchase
★★★★★
★★★★★
Genuine Bosch Brushes that fit my Router perfectly. Not sure why the original brushes had such a short life
Used Bosch brushes in my Craftsman router. part is as expected
Guest - July 24, 2025
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1 Dis-assemble and remove armature from motor housing.
2 Remove old bearing with a socket used as a punch to drive bearing out.
3 Clean area were bearing goes with clean cloth dampened with mineral spirits.
4 Put new bearing in freezer for one hour.
5 With ten minutes remaining put motor housing in preheated oven o
... Read moref 200 F.
6 After one hour remove bearing from freezer and motor housing from oven.
7 Drop bearing into opening.
8 Let housing cool and then re-assemble.
9 Note: cold causes the bearing to contract by .001 inches and the heat causes the housing to expand by .001 inches and the bearing drops into the bore.
Removed router motor from router base.
Opened router motor with allen wrench and removed the cover.
Brush Assembly replacement info:
Loosened power cable with a screwdriver.
Unhooked brush wires with pliers.
Unscrewed brush assemblies with a screwdriver.
Installed new brush assemblies (reverse di
... Read moresassembly instructions above.)
Power Switch replacement info:
Switch \"pops\" out from the front of the motor, tabs must be depressed.
Unhook switch wires with pliers.
Install new switch (reverse disassembly instructions).
Install router cover and install screws with allen wrench.
I replaced both the switch and the brush assemblies since I had it apart even though I suspected it was only the switch.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19510785
Manufacturer Part Number: 2610007958
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2610007958 Bosch Tool CARBON BRUSH SET")
_WW_1.gif "Part Location Diagram of 2610007958 Bosch Tool CARBON BRUSH SET")
