Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sander replacement pad
As ordered. on time. no hassles. Will use again.
Guest - May 25, 2020
Verified Purchase
★★★★★
★★★★★
Reapeat customer
Quick delivery and as always a perfect fit.
Guest - June 16, 2020
Verified Purchase
★★★★★
★★★★★
Very easy repair
New part made better than old. Orbital sander like new again.
Guest - August 31, 2020
Verified Purchase
★★★★★
★★★★★
It was the proper part
The part was how I expected it.
Guest - November 6, 2020
Verified Purchase
★★★★★
★★★★★
Fast, easy, convenient
The part arrived on time, it fit perfectly, and I never left my home.
Guest - January 22, 2021
Verified Purchase
★★★★★
★★★★★
Bosch factory fresh, arrived promptly, delighted with overall experience from order to receipt of product. Highly recommended.
Bosch factory fresh, prompt delivery. Delighted with overall purchase experience from order to receipt of product.
Guest - June 8, 2021
Verified Purchase
★★★★★
★★★★★
Very good delivery time.
9
Guest - June 22, 2021
Verified Purchase
★★★★★
★★★★★
Huh?
Why wasn’t my TOP rating good enough?
Ronald - November 5, 2021
Verified Purchase
★★★★★
★★★★★
Easy to shop and order.
The part was in great shape and arrived quickly. Easy to replace on sander. Question, the part was a cushioned pad. Do you carry a pad which is like the original which was a pad with a much firmer surface to attach the sanding paper? The firmer surface would be much more useful in more difficult jobs!
Guest - February 3, 2022
Verified Purchase
★★★★★
★★★★★
Exactly what I needed
The part arrived quickly and was just what I needed to replace on my sander. I was able to fix and get on with my project with hardly any delay!
Guest - January 3, 2022
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Loosen and remove the screws that secure the case to the internal mechanism.The pad is held in place by an Allen screw and is accessible once the case is open. The screw is evidently torqued into place at the time of manufacture so some effort is required to loosen it. Remove the screw and the pad. The inside of the case was heavily impac
... Read moreted with saw dust. It needs to be cleaned. Once clean, install the new pad and reinstall the allen screw. Reassembled the case around the works, then reinstall the screws and tighten. The repair is easy and straight forward. And hats off to Bosch for a beautifully designed piece of equipment.
Remove one screw from the pad, then removed the pad. I then used my compressor to blow out the saw dust from inside the sander. Then I installed the new pad with the screw. Worked perfectly. Just what I ordered!
Step 1: Laying the sander down on its side, holding the sander and pad with my left hand and using the Allen wrench in my right hand, I loosened the center bolt. This was pretty snug since there is Lock-tite used on the threads.
Step 2: Once the old pad was removed I wiped down the sander and removed all of the built up sawdust wit
... Read moreh a damp rag.
Step 3: Put a drop of blue Lock-tite on the center bolt and installed the new pad using Step 1 and tightened the center bolt.
Read less
Did you find this story helpful?
Thank you for voting!
sander pad worn out. Put in new new friction ring... only $3
Removed sander ring with on sander with wrench provided.
Pulled out friction ring with fingers
Snapped in new friction ring with fingers.
Put new sander ring where old one was
Replaced nut with wrench provided
Turned pad till holes lined up with lugs and tightened nut
Put wrench back in hole on sander
<
... Read morebr />Put new sanding pad on sander and went back to work
Read less
Did you find this story helpful?
Thank you for voting!
Sanding plate lost the velcro grip and wouldn\'t hold sanding discs
1. Remove the old pad by unscrewing the mounting screw.
2. Remove the old pad.
3. Clear out the old dry rotted particles from beneath the old mounting pad.
4. Align the new pad with the screw hole.
5. Secure the new pad with the original mounting screw.
1. Removed old hook and loop pad with allen wrench.
2. Replaced the failed friction ring. No tools required.
3. Installed new hook and loop pad with allen wrench.
It is useful to blow the sander clear of dust outside before replacing the parts.
An easy repair. Can\'t believe I waited until the hook an
... Read mored loop pad was shot before I replaced the friction ring. The sander works like new again!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19512769
Manufacturer Part Number: 2610917408
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
