This part is an OEM from Milwaukee. The switch is composed of metal, wiring and plastic, and is compatible with many grinders, shears and nibblers. This item is often fitted into the motor housing and left brush holder, allowing the operator to (de)activate the tool. The switch is sold individually. Pliers and a screwdriver are necessary for the proper replacement. Please refer to the specific manual for further repair instructions.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Straight forward and easy
Received a switch for a grinder. Customer service was friendly and took the time to find the part. It was an older grinder so it took a few weeks to come in, but I was informed of this upfront. Very pleases with eReplacement Parts.
Guest - January 11, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
To replace the switch on these units is fairly easy to do as long as you are comfortable crimping wires. The screws themselves can either take a flat blade screwdriver or a T20 torx driver (preferable). You will need two (2x) closed end splices. You can get these from Home Depot SKU #298233 (pack of 10x).
1- Remove the thr
... Read moreee (3x) screws near the power cable on the backside of the unit. This will allow access to the switch and brushes.
2- Slide the old switch out of the housing and cut the two wire crimps that are attached to the switch leads.
3- Crimp the new switch wires back into place where the old switch was connected. This is a SPST switch so it doesn\'t matter which wire goes where, just get them both attached.
4- Slide the new switch back into the housing. The switch has a cutout that aligns with the tab in the grinder\'s housing to ensure proper orientation. Ensure the wires are pressed back into the housing so they won\'t be pinched by the back cover or the motor. The switch is actually held in place by the back cover so it will still be loose until that is replaced.
5- Replace the back cover and reinsert the three (3x) screws removed in step 1.
6- At this time you can plug the die grinder into the wall to ensure properly switch function.
Happy Grinding!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10123742
Manufacturer Part Number: 23-66-2190
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 23-66-2190 Milwaukee Switch")
_WW_1.gif "Part Location Diagram of 23-66-2190 Milwaukee Switch")
