This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Correct part fitment was great.
Quick easy repair!
Guest - November 7, 2019
Verified Purchase
★★★★★
★★★★★
Quality part
The part was great, I just ordered the wrong size.
Guest - December 7, 2019
Verified Purchase
★★★★★
★★★★★
worked as expected
shipping was good
Karen - June 4, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair great part and fast shipping
Part was well packaged and in great condition. I had no trouble installing and the lawn mower is good to go.
Guest - June 22, 2020
Verified Purchase
★★★★★
★★★★★
eRepacements comes through again
Exactly what I needed and received in a timely manner.
Guest - September 29, 2020
Verified Purchase
★★★★★
★★★★★
Always
Always have the right part. Well packaged.prompt shipping although the shipping company is very slow.
Guest - April 26, 2022
Verified Purchase
★★★★★
★★★★★
Shipper "snafuh"
Parts shipped on time (via Fed-X). Did not show up on date (28th of April) promised by shipper (Fed-X). Called Fed-X three separate days, each time was told they could not find the part because "they" did not have a record for the tracking number assigned to my order, even though I could see. where my parts were using that same tracking number! The parts stayed in Southaven, Mississippi for 6 days without moving. The parts showed movement on the 4th of May and I received them the next afternoon. My riding lawnmower was out of commission from the 22nd of April until the 5th of May, was not a "happy camper" because of Fed-X
Glen - May 7, 2022
Verified Purchase
★★★★★
★★★★★
Just as expected
Everything was perfect, installation was easy and clear and back to cutting the grass in no time
Guest - May 26, 2022
Verified Purchase
★★★★★
★★★★★
Great place to find parts
I've ordered a few time from this site. its ALWAYS been fast and prompt and great communication. Parts diagrams help a bunch. one of the first sites I check out when need parts.
Richard - April 18, 2023
Verified Purchase
★★★★★
★★★★★
Riding lawnmower steering left guide.
Your staff was very helpful with the right fitting part for my Riding lawnmower. The part arrived on time. Thanks
Guest - July 12, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1) Using a standard floor hoist (jack), raise the front end of riding mower high enough to allow room for socket wrench to remove linkage nuts.
2) Using socket wrench and open end wrench; loosen and remove old linkage nuts and old lock washers. Tap on old drag linkage bar with rubber hammer and remove bar.
3) Insert new drag l
... Read moreinkage bar.
4) Place new lock washers and finger tighten nuts on both ends of new linkage bar. Using socket wrench and open end wrench, tighten both nuts securely.
5) Lower front end of riding mower using the floor hoist (jack).
Old bolt was sheared off and old adapter had to be removed with a gear puller.
The end of the motor crankshaft had to be cleaned up for the new adapter to fit.
After this everything went back together OK.
Did you find this story helpful?
Thank you for voting!
Blade was broken and fitting were damaged by a worker
I removed the blade bolt, lock washer and the damaged hardened washer and the blade. I then remove the damaged blade adapter. And installed the new one making sure the key in the adapter lined up with the keyway in the shaft. I placed an extra blade I had on the adapter, then installed the new hardened washer, new lock washer and blade bo
... Read morelt. The I removed the damaged flangelock hex nuts, and installed them on the 5/16-18 bolts.
Read less
Did you find this story helpful?
Thank you for voting!
Engine went , had to replace engine with all sub parts.
1. Removed old blade and engine.
2. Cleaned up everything.
3. Installed sub parts on new motor.
4. Installed new motor on deck.
5.Installed new blade hub on motor shaft.
6. Installed new blade.
7. Installed new throttle cable.
8.Completed all sub components on motor and deck.
9. Added oil a
... Read morend gas.
10. Start engine for breakin and test cut.
Removed old blade adapter. Slid new blade adapter up and into belt. Slid the 2 washers on then he blade. Inserted Hex screw and tightened.
First time ever using ereplacements. Their site was easy to use and order and they had all the parts I needed in stock. It all came neatly packaged within a week. I was happy and will orde
... Read morer from them again.
Read less
Did you find this story helpful?
Thank you for voting!
Just like to change blades to get a good cut on the lawn
Just needed a socket set to remove the hex bolt and then install the mower blade correctly. I had purchased extra hex bolt, washer for. back up. The replacement parts were perfect.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16381888
Manufacturer Part Number: 596238701
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
