Part Location Diagram of 1101670MA Murray Cable,drive 22fd Tm F
See part A4 in the diagram
( Grid squares measure 1x1 inch )

Cable,drive 22fd Tm F 1101670MA

Manufactured by:
Murray
ERP Number:
ERP9258525
Part Number:
1101670MA
Original Equipment Manufacturer ?
  Works with your model  226111X48A!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   226111X48A!

Product Description

?

This is a genuine OEM part which is made for use with Murray and Briggs and Stratton lawn mowers. It is the cable that engages the gear case to drive the equipment. Over time it may wear out or get damaged eventually requiring a replacement. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure. Note, this high-quality rubber insulated control drive cable is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Murray
  • Briggs and Stratton
This part works with the following products:
  • Lawn Mower
Part# 1101670MA replaces these:
  • 1101670MA

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced both cables and the drive belt.

Steve from Oak Harbor, Washington

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
7103363YP, 1101670MA, 7103977YP
The instructions were written very clearly. Easy to follow. Took me about 45 minutes to replace everything. I have a \"new\" mover again.
Thanks for all your help.
Did you find this story helpful?
Thank you for voting!

Lawn mower power drive cable broke

Doug from Ogden, Utah

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
1101670MA
1. Removed drive belt cover on mower deck.
2. Removed cable from drive mechanism.
3. Removed power drive controller from mower handle.
4. Installed new cable onto drive mechanism.
5. Installed drive belt cover on mower deck.
6. Installed power drive controller on mower handle.
7. Started mower, power dr ive worked like new.
Did you find this story helpful?
Thank you for voting!

Worn drive wheels, drive control not working, needed new

Otis from Opelika, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
71132MA, 37X123MA, 1101670MA
Remove the hub caps from the wheels. Remove the wheel nuts and washers from the axle. Remove the old wheels and put a little lube on the axle. Slide the new wheels on. Then install the washers, wheel nuts and hub caps. Remove the bolt and nut from the drive control. Remove the other end from the governor. Install the new drive control in reverse order. Remove the blade and all the shrouds in the way of the belt. Remove the belt cover in the front of the mower. Install the belt on the crank shaft pulley, then the pulley on the transmission. You should be able to move the transmission backwards a little bit to aid in the installation of the belt. Install the shrouds, blade and belt cover.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9258525
Manufacturer Part Number: 1101670MA
Brand Model Number Description
Murray 22605x50H Lawn Mower - 22&#34 Lawn Mower
Murray 226110x24A Lawn Mower - 22&#34 Lawn Mower
Murray 226110x24C Lawn Mower - 22&#34 Lawn Mower
Murray 226110x48B Lawn Mower - 22&#34 Lawn Mower
Murray 226110x50A Lawn Mower - 22&#34 Lawn Mower
Murray 226110x52A Lawn Mower - 22&#34 Lawn Mower
Murray 226111x48A Lawn Mower - 22&#34 Lawn Mower
Murray 226111x52A Lawn Mower - 22&#34 Lawn Mower
Murray 226111x52B Lawn Mower - 22&#34 Lawn Mower
Murray 226111x92A Lawn Mower - 22&#34 Lawn Mower
Murray 226111x92B Lawn Mower - 22&#34 Lawn Mower
Murray 226112x52A Lawn Mower - 22&#34 Lawn Mower
Murray 228410x199C Lawn Mower - 22&#34 Lawn Mower
Murray 228510x24A Lawn Mower - 22&#34 Lawn Mower
Murray 228510x99A Lawn Mower - 22&#34 Lawn Mower
Murray 228510X99B Lawn Mower - 22&#34 Lawn Mower
Murray 228511x24A Lawn Mower - 22&#34 Lawn Mower
Murray 228511x24B Lawn Mower - 22&#34 Lawn Mower
Murray 228511x31C Lawn Mower - 22&#34 Lawn Mower
Murray 228511x31D Lawn Mower - 22&#34 Lawn Mower
Murray 228511x8E Lawn Mower - 22&#34 Lawn Mower
Murray 228511x8F Lawn Mower - 22&#34 Lawn Mower
Murray 228512x48A Lawn Mower - 22&#34 Lawn Mower
Murray 228512x8A Lawn Mower - 22&#34 Lawn Mower
Murray 228610x30A Lawn Mower - 22&#34 Lawn Mower
Murray 228610x31A Lawn Mower - 22&#34 Lawn Mower
Murray 228610x692A Lawn Mower - 22&#34 Lawn Mower
Murray 228611x50A Lawn Mower - 22&#34 Lawn Mower
Murray 228650x692C Lawn Mower - 22&#34 Lawn Mower
Murray 228650x99A Lawn Mower - 22&#34 Lawn Mower