Genuine Black and Decker replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problem
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect
Received the brushes fast, installed in my hedge trimmer I've had for 12 years and it fired right up again. Thank you so much!!!!!
Guest - September 16, 2019
Verified Purchase
★★★★★
★★★★★
Hedge clipper repair
The parts for my Black & Decker hedge clipper arrived in good shape and fit OK
My hedge clipper is now working again .
Thank you.
Guest - June 6, 2020
Verified Purchase
★★★★★
★★★★★
Brushes fit perfect
Repaired my jig-saw, runs like brand new, at a fraction of the price of a new one.
David - November 23, 2021
Verified Purchase
★★★★★
★★★★★
Just what I needed.
The part fits perfectly and saved my tool from the trash heap!
Guest - February 1, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair with quality parts
It took quite a while for the parts to arrive due to supply chain issues but they kept me informed. Parts arrived and I completed the repair of my saw with no issues. Saved myself from having to buy a new jig saw.
Guest - July 5, 2023
Verified Purchase
★★★★★
★★★★★
Just what I needed
Turned out I only needed one brush. But I ordered two. So now I've got a backup in my jigsaw box. Thank you.
Guest - July 24, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the metal platen from the Jig Saw base
Removed the Torx head screws and open the Jig saw molded body
Attention: There is a square Nut for the Jig Saw Base that will become loosw when the body is opened!
Gently remove the Brush Housing from its position against the motor commutator
Remove the contact clip fro
... Read morem the Brush housing that secures the brush and spring
Remove the Brush and Spring from the H Brush Housing
Remove the Spring from the worn Brush and assemble to the replacement Brush
Insert the Brush and spring back into the Brush Housing
Return the brush housing back into position in motor frame against the commutator
Re-assemble the Jig saw Body and screws
Re-assemble the Jig saw base
Remove the screws from the housing
Carefully separate the housing halves
Disconnect the brush lead
Pull the brush holder out
Remove the spring and old brush
Insert the new brush in the holder
Install the complete assembly in its place and connect the lead
Screw the housings back together
!. Removed the housing screws.
2.Separated the housing.
3. Removed the brush holders.
4. Exchanged the old brushes with the new.
5. Reinstalled the brush holders.
6.Placed the housing parts together.
7. Reinstalled the housing screws.
Did you find this story helpful?
Thank you for voting!
Odd noises when using the sander, lots of sparks from brushes
Unscrew body halves, carefully remove the half that the screw heads came from making sure the parts stay in place, disconnect the wires from the connectors on the brush holders, replace the brushes, reconnect the wires, clean the dust from the inside of the sander, reassemble.
Brushes have been worn out.
Ordered brushes and changed them.
The hardest part was to open jig saw, because heximal key was needed.
Open the case, carefully pull out the brush holders and change brushes.
Close the case.
Took digital photo prior to disassembly then replaced both carbon brushes. Be sure the new brush extends beyond its holder through the square hole and the wiring in original locations.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18979418
Manufacturer Part Number: 089754-01
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
