This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with electric trimmers. The copper contact is used to link the switch assembly to the extension cord assembly. This contact is sold as a single item, please note the other contact is sold separately.
Troubleshooting
This part works with the following brands:
Black and Decker
Craftsman
DeVilbiss
This part works with the following products:
Hedge Trimmer
Trimmer
Part# 87486-00 replaces these:
87486-00
P87486-00
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair of hedge trimmer
Works perfectly
Ginger - June 8, 2023
Verified Purchase
★★★★★
★★★★★
Exactly same part and easy to install
It was easy to purchase the parts I need pickup the parts & preceding to checkout after you see what you have payed for.
Thank you ereplacementparts
Guest - June 10, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Unscrewed hedge trimmer cover. Removed both plug contact terminals and cut them from their wires. Stripped the two wires and crimped the two new contact terminals. Re-assembled cover. Hedge trimmer works good as new! Thank you e Replacement Parts!
1. Disassembled handle by removing 5 Phillips screws
2. Carefully split handle halves noting all wire locations
3. Located broken plug prong and removed using flat blade screwdriver
4. Fitted new prong and pressed in with flat blade screwdriver
4, Made sure electrical wire to trigger switch was properly attached to
... Read more prong
5. Reassembled handle using 5 Phillips screws
6. Tested unit by plugging hedge trimmer into extension cord and turning On.
Loosened screws, pried open housing, held open with a screwdriver, removed broken contact, replaced and soldered new contact, removed screwdriver, replaced screws and tightened. Rather than disassemble the entire unit ( and then everything falls out ) I just pried opened the handle part and held open with a screwdriver.
Did you find this story helpful?
Thank you for voting!
The A/C plug-in prong broke off and I\'ve been without the line feed spring for years.
1. Unlocked and removed the line refill spool and slid the spring on the shaft.
2. Tried to pry the crimped flanges open but could not. Had to cut and re-strip the wire; had just enough slack in the wire to do this.
3. Crimped the new contact terminal on and re-assembled handle. Works excellent!
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10185184
Manufacturer Part Number: 87486-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
