Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
19516013-1-M-Bosch Tool-3600703011-CORD PROTECTOR
Part Location Diagram of 3600703011 Bosch Tool CORD PROTECTOR
See part 6 in the diagram
( Grid squares measure 1x1 inch )
19516013-1-S-Bosch Tool-3600703011-CORD PROTECTOR Part Location Diagram of 3600703011 Bosch Tool CORD PROTECTOR

CORD PROTECTOR 3600703011

Manufactured by:
Bosch Tool
ERP Number:
ERP19516013
Part Number:
3600703011
Original Equipment Manufacturer ?
  Works with your model  11307!
$6.15
★★★★★
★★★★★
1 Review
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   11307!

Jump to:

Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Frequently Purchased Together

?
O-RING
$9.26
In Stock
CHEESE HEAD SCREW
$5.16
In Stock
Minimum Quantity of 2 required
SHEET METAL SCREW
$4.13
Special Order
Minimum Quantity of 2 required
STOPPING DEVICE
$13.40
In Stock
RETAINER
$5.16
In Stock
Minimum Quantity of 2 required
SERVICE PACK
$69.35
In Stock
ARMATURE
$216.46
On Order
PROTECTIVE CAP
$6.23
In Stock
PROTECTIVE CAP
$5.37
Special Order
THREADED RING
$16.30
Special Order
CHEESE HEAD SCREW
$5.16
In Stock
Minimum Quantity of 2 required

Troubleshooting

This part works with the following brands:
  • Bosch
This part works with the following products:
  • Grinder
  • Electric Drill
  • Screwdriver
  • Chainsaw
  • Demolition Hammer
  • Wrench
  • Nibbler & Shears
  • Angle Grinder
  • Sander Polisher
  • Drill
  • Hammer
  • Hammer Drill
Part# 3600703011 replaces these:
  • 3600703011
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy Repair, worked great!
I put a new, longer power cord on my jackhammer, and this cord protector worked great to relieve the strain at the handle.
Scott - February 28, 2023
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Power cord was old and had insulation cracking.

Daniel from WILMINGTON, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
3600703011, 1604460092
1.Removed handle from grinder
2.Removed screws to separate the two halves of the handle
3.Removed cord retaining clamp and loosened electrical connections to remove old cord
4.Made electrical connections with new cord and secured with retaining clamp
5.Make sure the switch was properly in place and wire with cord p rotector
6.Secured the two halves of the handle with screws
7.Reattached handle to grinder body
Read less
Did you find this story helpful?
Thank you for voting!

Cord protector failed due to age

Bill from FILLMORE, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
3600703011
1. Separated case halves.
2. Removed strain relief for power cord.
3. Disconnected power wires from switch.
4. Slid old cord protector off, installed new cord protector.
5. Connected power wires to switch.
6. Installed strain relief.
7. Attached case halves together.
8. Tool tested ok.
Did you find this story helpful?
Thank you for voting!

Oil leaking.

Augie from Los Angeles, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
3600703011, 1900210130, 1610210042, 1610210041
Removed the lower section of the tool. Replaced O-rings, seal, cord and cord protector. I used the exploded view of my tool on your website, which proved to be super helpful.
Did you find this story helpful?
Thank you for voting!

Power cord was damaged.

Taylor from Modesto, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
3600703011, 2914551114, 1604460092
1. Remove ON/Off switch with flat head screwdriver.
2. Remove the six screws holding the handle assembly to the main body.
3. Remove old power cord, keeping in mind its orientation and where the wires connected.
4. Install new cord protector and connect wire ends into their correct locations.
5. Reattach handle ass embly with the six screws.
6. Place On/Off switch half-way in its location and snap the other end in.
7. Verify that the machine functions properly.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19516013
Manufacturer Part Number: 3600703011
Brand Model Number Description
Bosch 0300 Angle Grinder - Angle Grinder
Bosch 0600300039 Grinder - Angle Grinder
Bosch 0600301039 Grinder - Angle Grinder
Bosch 0600302039 Grinder - Angle Grinder
Bosch 0600304039 Grinder - Angle Grinder
Bosch 0600305039 Grinder - Angle Grinder
Bosch 0601101904 Drill
Bosch 0601102904 Drill
Bosch 0601102905 Drill
Bosch 0601121039 Electric Drill - Un. 2-Speed Drill
Bosch 0601121139 Drill
Bosch 0601170004 Electric Drill - Drill
Bosch 0601170040 Electric Drill - Drill
Bosch 0601188639 Drill
Bosch 0601188739 Drill
Bosch 0601189639 Drill
Bosch 0601189739 Drill
Bosch 0601201004 Grinder - Straight Grinders
Bosch 0601201006 Grinder - Straight Grinders
Bosch 0601201012 Grinder - Straight Grinders
Bosch 0601201013 Grinder - Straight Grinders
Bosch 0601201014 Grinder - Straight Grinders
Bosch 0601201015 Grinder - Straight Grinders
Bosch 0601201016 Grinder - Straight Grinders
Bosch 0601201017 Grinder - Straight Grinders
Bosch 0601201018 Grinder - Straight Grinders
Bosch 0601201020 Grinder - Straight Grinders
Bosch 0601202004 Grinder - Straight Grinders
Bosch 0601202005 Grinder - Straight Grinders
Bosch 0601202007 Grinder - Straight Grinders
CORD PROTECTOR
$ 6.15
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖