- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Jump to:
Product Description
?This Riken piston ring set is an OEM part direct from Honda. The three-piece, metal ring set is compatible with many Briggs & Stratton small engines. Secured to the piston, this component helps to provide a seal for the piston and cylinder. A screwdriver, socket set, pliers and a wrench set are often necessary for the installation.
Troubleshooting
- Honda
- Briggs and Stratton
- Toro
- Engine
- Lawn Mower
- Pressure Washer
- Snow Blower
- Generator
- 13010-ZL8-014
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Knocking noise and stuck exhuast valve on Honda GCV 160 engine
Gary from Parker, Colorado
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 90551-ZE0-000, 14441-Z0J-000, 13200-ZL8-000, 13010-ZL8-003
After reassembly, did not have any compression, found adjustment out on the rocker arms, was keeping exhaust valve open a little, not allowing compression to build up. Adjusted, then after two or three pulls, engine started.
With the timing belt, it is important to make sure that is reassembled correctly to have valves timed properly. Found a video on youtube that explained how to do that.
Rings wore out
Janet from Willard, Utah
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Wrench set
- Parts Used:
- 14711-ZL8-000, 12310-Z8A-000, 14721-ZL8-000, 13010-ZL8-003
2. Remove valve cover
3. Open crankcase
4. Remove flywheel with puller (try to mark locations on timing belt)
5. Remove crankshaft and piston (lose markings on timing belt)
6. Remove valve rockers and Springs then valves
7 ... Read more . Order new parts and wait for them to come
8. Install new valves and Springs and rockers (using online diagrams for exact part locations)
9. Install new rings on piston.
10. Install piston using recently purchased ring compressor
11. Install crankshaft
12. Refer to Internet for timing (quite simple)
13. Reinstall flywheel
14. Put rest if motor back together as best I can.
15. Try to figure why choke isn\'t working like should, no luck
16. Put in oil and gasoline and celebrate when it fires up and runs.
No compression/bent valve
Easton from Fremont, Ohio
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Socket set, Wrench set
- Parts Used:
- 14711-ZL8-000, 14400-ZL8-013, 13010-ZL8-003
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 13010-ZL8-003
| Brand | Model Number | Description |
|---|---|---|
| Briggs and Stratton | 01054-0 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-0 (010540, 01054 0) Parts |
| Briggs and Stratton | 01054-2 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-2 (010542, 01054 2) Parts |
| Briggs and Stratton | 01054-3 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-3 (010543, 01054 3) Parts |
| Briggs and Stratton | 01170-0 | Generator - Briggs & Stratton Generator Model 01170-0 (011700, 01170 0) Parts |
| Briggs and Stratton | 01431-0 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-0 (014310, 01431 0) Parts |
| Briggs and Stratton | 01431-1 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-1 (014311, 01431 1) Parts |
| Briggs and Stratton | 01431-2 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-2 (014312, 01431 2) Parts |
| Briggs and Stratton | 01431-3 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-3 (014313, 01431 3) Parts |
| Briggs and Stratton | 01431-4 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-4 (014314, 01431 4) Parts |
| Briggs and Stratton | 01434-0 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-0 (014340, 01434 0) Parts |
| Briggs and Stratton | 01434-1 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-1 (014341, 01434 1) Parts |
| Briggs and Stratton | 01434-2 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-2 (014342, 01434 2) Parts |
| Briggs and Stratton | 01435-0 | Pressure Washer - Briggs & Stratton Pressure Washer Model 01435-0 (014350, 01435 0) Parts |
| Briggs and Stratton | 1170-0 | Generator - 2,500 Watt Portable Generator |
| Toro | 20194 | Lawn Mower - Lawn Mower |
| Honda | EN2000 | Generator - Generator |
| Honda | EN2500 | Generator - Generator |
| Honda | FG400 | Tiller - Tiller |
| Honda | FG500 | Tiller - Tiller |
| Honda | GC135 | Engine - Small Engine |
| Honda | GC160 | Engine - Small Engine |
| Honda | GC160A | Engine - Small Engine |
| Honda | GCV-160-A | Engine - Engine |
| Honda | GCV-160-A1 | Engine - Engine |
| Honda | GCV135 | Engine - Small Engine |
| Honda | GCV135A | Engine - Small Engine |
| Honda | GCV160 | Engine - Small Engine |
| Honda | GCV160A | Engine - Small Engine |
| Honda | GCV160A0 | Engine - Engine |
| Honda | HRB216 | Lawn Mower - Lawn Mower |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.