Part Location Diagram of 22-64-1822 Milwaukee Cord Set
See part 22 in the diagram
( Grid squares measure 1x1 inch )

Cord Set 22-64-1822

Manufactured by:
Milwaukee
ERP Number:
ERP10122788
Part Number:
22-64-1822
Original Equipment Manufacturer ?
  Works with your model  6798-1!
$25.55
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   6798-1!

Product Description

?

It is a genuine replacement component that is supplied directly from the original equipment manufacturer, it is commonly used with Milwaukee power tools. The cord is hardwired to the tool in order to supply power from a standard U.S. outlet, if the cord is damaged it should be replaced. This high-quality rubber insulated part is sold individually, keep in mind the cord protector is sold separately.

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Electric Drill
  • Jig Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Drill would run in reverse only.

Michael from Montgomery, Alabama

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
23-66-2148, 22-64-1822
Followed instructions accompanying the replacement switch.
Did you find this story helpful?
Thank you for voting!

Power cord was dried and cracked.

Dave from Marysville, Washington

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
44-76-0210, 22-64-1822
Using a very small ratchet set to open the case, the wires just pull out of the junction box, after trimming the new wires to the correct length, I soldered them so as to make them easy to insert fully into the box. Reassembled and tested it runs perfect. Should give a few more years of service.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10122788
Manufacturer Part Number: 22-64-1822
Brand Model Number Description
Milwaukee 0231-1 Electric Drill - Electric Drill / Driver
Milwaukee 0370-20 Electric Drill - 3/8 in. Close Quarter Angle Drill
Milwaukee 5303-20 Demolition Hammer - Rotary Hammer
Milwaukee 5324-02 Demolition Hammer - Rotary Hammer
Milwaukee 6020-02 Sander Polisher - Sander
Milwaukee 6025-02 Sander Polisher - Sander
Milwaukee 6266 Jig Saw - Jig Saw
Milwaukee 6276 Jig Saw - Jig Saw
Milwaukee 6276-21 Jig Saw - 6276-21 (Serial 890a) Orbital Jig Saw Parts
Milwaukee 6747-1 Electric Drill - 2500 RPM Rev. Drywall Screwdriver
Milwaukee 6755-1 Electric Drill - D.I. Drywall Screw Driver
Milwaukee 6758-1 Electric Drill - D.I. Drywall Screw Driver
Milwaukee 6759-20 Electric Drill - Power Unit
Milwaukee 6798-1 Electric Drill - Positive Clutch Rev Screw Driver
Milwaukee 6799-20 Electric Drill - Power Unit