This is an genuine OEM approved replacement part designed for use with Milwaukee Power Tools. This item is Sold Individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. It is made out of Rubber and Metal. This cord comes together with Protector/Grommet.
Troubleshooting
This part works with the following brands:
Milwaukee
This part works with the following products:
Electric Drill
Hammer Drill
Drain Cleaner
Screwdriver
★
Customer Part Reviews
?
4.4
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 star
1
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Repcaement cord for drill
works great got it in 2 days
Guest - June 15, 2019
Verified Purchase
★★★★★
★★★★★
Easy install
arrived on time and in good condition. Just what I needed
Guest - September 25, 2019
Verified Purchase
★★★★★
★★★★★
Great to work with Ereplacement
Great to order from ereplacement products and service was great
Gerald - April 16, 2020
Verified Purchase
★★★★★
★★★★★
Replacement power cord 35 year old Milwaukee drill
Exact duplicate of the original, fit like a glove.
Guest - March 9, 2021
Verified Purchase
★★★★★
★★★★★
replacement electric cord.
The Milwaukee screw gun replacement electrical cord I received was a genuine Milwaukee part.It fit perfectly.Good price,fast shipping,great customer service.I will certainly buy again.
Guest - May 10, 2022
Verified Purchase
★★★★★
★★★★★
Great part, exact fit!!
Easy to order & the shipping was quick. It’s a good feeling to know that parts are available somewhere for the tools that I own! Shipping was fast and convenient
George D - September 21, 2023
Verified Purchase
★★★★★
★★★★★
Not the right cord
The end did not have the reinforcement as pictured. I sent a request that someone look into it with no response
Guest - July 2, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Opened up drill handle to expose wiring connections to switch / trigger
2. Disconnected wires - damaged switch / trigger releasing old fashioned stab connections (no illustrations - just verbal instructions found).
3. Soldered the two spades from old cord onto two leads of new power cord.
4. Due to damage from disasse
... Read morembly poor connection with one spade
5. Searched for replacement switch - unavailable (drill too old)
6. Removed spade from one lead - soldered lead to switch
7. Connected other leads with spade and nut (grounding lead)
8. Closed up drill handle.
Remove one half of the handle. Then make a wiring diagram. To remove the wires from the switch I used a paper clip and pressed it the holes where the wires were connected and then pulled the wires out. To make it easier to insert the wires into the new switch, strip about a half inch at the end of the new cord and put solder on the wires
... Read moreto harden them. Then press them into the switch. You will also want to use a wire terminal to crimp on the ground wire. Then put the handle back on.
For my 40 year old Milwaukee drill, I bought the parts I used and downloaded bulletin 58-01-0645 for the wiring diagram which allowed me to verify that the old cord was wired correctly. I stripped and tinned the new leads to match the old ones. The switch assembly has a push in connector that must be released by pushing in a piece of stif
... Read moref wire or a jewelers screwdriver next to the old wire to release the old wire. Do not try to pull out the old wire without releasing since the switch is no longer available and you will be stuck with parts you don\\\'t need when you buy your new drill. The wire leads don\\\'t like to stay where they belong, so it may take several tries to get the handle with its 6 screws back together. If you have to force things, take it apart again and rearrange the leads.
I am 71 years old and I have been using a soldering iron since I was 7, so this was an easy fix for me. There aren\'t very many parts still available for these old drills, so open up the drill and investigate before you order. The old chuck key disappeared after the original key holder broke. Since I inherited the drill from my dad, it has sentimental value. It was also difficult to use without a proper key which made the drill low mileage although it was 40 years old. The switch has a broken pivot on the reversing lever which made the repair questionable. It works! I don\'t lend it out for that and other reasons.
Took casing off drill
Freed up wires from drill motor
Installed new wires from new cord to drill motor wires
Reinstall casing
Test drill to see if it works ----- Bingo
Put in rest of screws to drill motor casings .
1. Make sure tool is unplugged
2. Remove screws & take tool apart to remove old & worn power cord
3. Check to make sure new power cord fits properly before trimming to fit
4. Tin the power cord ends & install into switch
5. Be careful & test tool before reassembling
Did you find this story helpful?
Thank you for voting!
AC cord very dried out and cracked in several places, easily cracked when bent, safety hazard.
Simply replaced the old cord set with the new one, spliced the leads onto existing leads in the trigger and ground wire. Reassembled the handle and tested as working correctly. I did blow out the motor housing while the handle was removed.
Removed the screws from the handles
Disconnected the cord wires from the switch and the ground wire
Connected the new cord wires to the switch and attached the ground wire
Screwed the handles together
Did you find this story helpful?
Thank you for voting!
The gasket around the power cord where it enters the handle part of the drill cracked and deteriorated over time
1. Drew the screws that hold the two halves of the handle together.
2. Disconnected the leads of the old power cord.
3. Connected the new cord.
4. Cleaned out dust and residue from the mechanism with a soft paintbrush.
5. Reassembled the handle.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10122719
Manufacturer Part Number: 22-64-0665
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 22-64-0665 Milwaukee Cord Set (6-foot)")
_WW_1.gif "Part Location Diagram of 22-64-0665 Milwaukee Cord Set (6-foot)")
