This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exactly what I needed
It was the right part, and easy install. The parts arrived in a very timely manner.
Thank you
Guest - January 14, 2020
Verified Purchase
★★★★★
★★★★★
Parts were exact and made repairs simple, quick and painless.
The replacement parts ordeted were exact and with the aid of the video made the repairs very simple. My experience with eReplacementPatrs has always met and/or exceeded my expectations! Thank you!
Guest - February 6, 2020
Verified Purchase
★★★★★
★★★★★
DeWalt Palm Sander
With the help from your repair videos, replacing was a snap.
I am a returning customer and will use you site in the future as needed
John
Guest - June 3, 2020
Verified Purchase
★★★★★
★★★★★
Parts ordering was convenient and the parts arrived quickly.
The carbon brushes and keeper springs for my orbital sander repair arrived in good shape and were easy to install. I will order from eReplacementParts in the future.
Guest - July 3, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected
Good condition
Guest - October 19, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I took the still apart and realize that the brushes have welded themselves to the brush casing. As I tried to remove the brush it cracked the brush housing. I then ordered new brushes new springs and the brush holder and installed everything after carefully brushing down all the parts and cleaning everything. Put it all together and it wo
... Read morerks fine
Read less
Did you find this story helpful?
Thank you for voting!
Handle of case broke off and with it, broke brush ring holding contact brushes to commutator.
Take case apart and separate into 4 parts.
Pull commutator out of end bearing to access brush ring.
Remove brush ring and replace with new.
Install commutator.
Install brushes in brush ring and attach holding springs
Put case parts together
The handle broke off because plastic mountings broke. Instead o
... Read moref getting new handle parts, I improvised and used an automotive glue to attach handle parts. Vibration initially broke handle, but gluing is more resistant to breakage.However, will be extremely hard to take apart if needed.
the tool is over 10 yrs old already. I\'m sure it will last me a long time.
Read less
Did you find this story helpful?
Thank you for voting!
Grinder made noise when operating and was weak power
I took the saw apart. This took the most time since I could find no instructions on how to take it apart. Least obvious issue was that there was a retainer ring on the saw side of the motor shaft that allowed me to take of the saw cover and safety cover. As I went along, I ordered parts that I needed. Especially since I lost one of th
... Read moree brush springs and broke the brush ring! I wish I would have figured out all the parts I needed first so I could save money on shipping! Toughest problem was that I could not find any replacement parts for the burned out switch - I had to take the switch apart and solder the terminals. Good news is that I used the saw yesterday to cut wood!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10173420
Manufacturer Part Number: 445860-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
