The anvil fits between the nylon washer and the hammer. This item is available individually and is made out of metal. This is an original Makita part for use in impact drivers. It might require a screwdriver and an adjustable wrench to replace this part. It will require replacing if it becomes broken.
Troubleshooting
This part works with the following brands:
Makita
This part works with the following products:
Drill
Impact Driver
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Excellent how-to videos; right part
First, thank you for the videos showing how to remove the chuck, and then dissect the Makita driver down to the anvil (which I’d globbed up with a wrong bit) AND then put it back together working properly! You had the right part which was delivered quickly. The right part plus confidence from your videos quickly had my driver back to work. Thank you!!!
Guest - March 20, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Watched a youtube video on the Replacement Parts channel- and followed the instructions. It was perfect. I also cleaned the inside of my impact driver while it was open. The most difficulty I had was removing the jump loop and spring because a bit was jammed in the anvil. This must have taken an hour or more alone. Also in reassemblin
... Read moreg the rear round casing- I found if I tightened the screws down all the way- it impeded the performance of the brushes. I made a rubber gasket out of a rubber band and it provided enough of a spacer for the tool to work at full speed/ performance.
I used replacement parts on you tube to see how it was done to basically change out the anvil.
I then went to e-replacement parts.com to find the parts I would need.
Parts came in a good timely manner.. I hack sawed the socket off, unscrewed the impact driver casings, replaced parts, and put it back together. I did use the e
... Read more-replacement diagrams while doing this ,just to make sure I had it right..
I would use and recommend e-replacement parts to everyone in a heart beat, after all replacing something is much cheaper than buying a new one..
Thank you...
Read less
Did you find this story helpful?
Thank you for voting!
Anvil apparently worn out. The bit was stuck in the anvil and while I tried multiple times could not remove the bit
I followed the repair video by ereplacements.com to disassemble and reassemble the drill. I did have two difficulties: When removing the spring washer it shot out quickly and I never was able to find it so I had to purchase one of those also. Also my transmission was difficult to open but I eventually succeeded. The video was extremely
... Read morehelpful and I recommend it
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11882893
Manufacturer Part Number: 324432-0
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
