10143244-1-M-Makita-231951-8-Ring Spring 11

( Grid squares measure 1x1 inch )

10143244-1-S-Makita-231951-8-Ring Spring 11

10143244-2-S-Makita-231951-8-Ring Spring 11

10143244-3-S-Makita-231951-8-Ring Spring 11

10143244-1-S-Makita-231951-8-Ring Spring 11 360 view

Ring Spring 11 231951-8

Manufactured by:: Makita
ERP Number:: ERP10143244
Part Number:: 231951-8

Works with your model 6936FD!

$5.37

★★★★★

6 Reviews

Delivers in 3-5 Business Days!

Easy

15 - 30 mins

(16 rated repairs) ?

Works with your model 6936FD!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

Genuine Makita replacement part, this item is sold individually. This part is used on the tools listed below, to contain all of the part that are attached to the front end of the tool. Such as the Chuck assemblies on the the Impact Drivers and the Spindle Assemblies on the Screwdrivers.

Frequently Purchased Together

Flat Washer

★★★★★

(3)

$5.16

Minimum Quantity of 2 required

Steel Ball 3.5

★★★★★

(4)

$6.15

Steel Ball

★★★★★

(6)

$6.15

Compression Spring

$5.37

Minimum Quantity of 2 required

Anvil M

★★★★★

(2)

$13.12

Bit Sleeve

★★★★★

(4)

$5.37

Sleeve

$10.97

Troubleshooting

This part works with the following brands:

Makita

This part works with the following products:

Drill
Impact Driver
Screwdriver
Electric Drill
Cordless Drill

★

Customer Part Reviews

4.5

Average Rating (out of 5):

★★★★★

(6 Reviews)

Click to filter by ratings:

5 stars

5
4 stars

0
3 stars

0
2 stars

1
1 star

0

< Prev
1
Next >

Sort by:

★★★★★

Great place to find replacement parts at a good price

I found the parts I needed for my trimmer. Got them in a short time. And I will be shopping here again. Thanks

Guest - May 29, 2019

Verified Purchase

★★★★★

Here’s a place that you can find what anybody needs. And at a great price. Tuanks

Perfect fit

Guest - October 7, 2019

Verified Purchase

★★★★★

Excelente service .

Fast delivery, exactly what I need it.

Guest - September 25, 2020

Verified Purchase

★★★★★

Best Place to Find and Buy Parts

I purchased a “ring spring” for my Makita impact/drill driver. I like that you can use a parts illustrator and purchase the parts so handily from the same site. I have had no problems with eReplacement.

James - December 15, 2020

Verified Purchase

★★★★★

perfect fit

saved lots of cash w/ diy and correct parts. OEM all the way!

Iglobal - February 9, 2022

Verified Purchase

★★★★★

First experience with eReplacementsParts

Web site and and ordering went well. On 12/23/23 I placed an order for: 1 pc Ring Spring ($4.99)and 2 pcs Steel balls ($3.99 x 2 = $7.98) for my Makita impact drill. Rec'd the Ring Spring a few days later. To date 1/5/24 I have not rec'd the steel balls (status "order delayed". Total cost of parts was $12.97 and shipping for 3 pcs, that together weigh less that an envelope, was $10.99. I will probably not be using you as a parts provider again. Thank you

Guest - January 5, 2024

Verified Purchase

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

15 - 30 mins

(16 rated repairs) ?

< Prev
1
2
Next >

Sort by:

The hammer case was broken and the hammer case complete had scratches and dents the ring spring was missed place and the bit sleeve was wobbly

Abdullah from Bronx , New York

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 452837-5, 424429-0, 326068-1, 140946-9, 231951-8

I removed the bit sleeve with the washer, spring and the silver balls.

Loosened the hammer cover, removed the gear assembly, removed the anvil and before I decided to put everything together with the new parts I Re-greased the gears and the inside of the new hammer case complete. Than I went ahead and re assembled everything ... Read more

Read less

Did you find this story helpful?

Driver tip stuck in receiver

Stephen from Warrenton, Missouri

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 267085-1, 261108-7, 233005-7, 231951-8

Removed the spring retainer clip. Remove the stuck driver tip. Lost the spring retainer clip. order a new one with other parts that I may lose in this repair process. Put the tip back together with new part.

Did you find this story helpful?

Bits falling out of impact head

Alex from Fair haven, New Jersey

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers
Parts Used:: 267085-1, 231951-8

Grab ring spring with hook of blade and pull out
Take sleeve off and spring install ball bearing
Put spring nose cover and flat washer back on
Use needle nose pliers to spread ring spring and push back in with flat head screw driver estimated repair time 3 min

Did you find this story helpful?

drill bit broken in drill chuck

Albert from Sanford, Florida

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers
Parts Used:: 326069-9, 231951-8, 216001-0

replaced the spring, steel balls and anvil being careful to not drop the bearings.

Did you find this story helpful?

Spring loaded chuck popped apart and we lost the steel balls

Randy from Harleysville, Pennsylvania

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 267085-1, 233005-7, 231951-8, 216001-0

Replaced the steel balls
Installed chuck knob
Installed spring
Installed flat washer
Installed spring clip

Did you find this story helpful?

Bit would not release

Daniel from Bandon, Oregon

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 324878-0, 267085-1, 261108-7, 233005-7, 231951-8, 216001-0

After taking it apart I just put it back together using the exploded diagram.

Did you find this story helpful?

Ring spring came off allowing ball bearings to fall out and flat washer to get lost.

Lyle from Wilmington, Ohio

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 324420-7, 267085-1, 233005-7, 231951-8, 216001-0

Put the ball bearings in place then put the sleeve and spring on and put the flat washer in place, you will need a very small screwdriver to snap the ring spring into place while compressing the flat washer down with a thumb or finger.

Did you find this story helpful?

Old socket extension stuck in impact driver..

maurice from gearhart, Oregon

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers
Parts Used:: 324432-0, 233005-7, 231951-8, 216001-0

I used replacement parts on you tube to see how it was done to basically change out the anvil.
I then went to e-replacement parts.com to find the parts I would need.
Parts came in a good timely manner.. I hack sawed the socket off, unscrewed the impact driver casings, replaced parts, and put it back together. I did use the e ... Read more

Read less

Did you find this story helpful?

end of driver broke inside chuck

robert from SAN ANGELO, Texas

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 231951-8, 216001-0

like a DA took apart standing in shop, so i lost 1 ball an spring ring. used grease to hold balls in place,replaced other parts,used screwdriver to push spring ring into place.

Did you find this story helpful?

Bit broke off in tool

TIMOTHY from SHINGLE SPRINGS, California

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers
Parts Used:: 325975-5, 231951-8, 216001-0

Disassembled, replaced broken parts, reassembled

Did you find this story helpful?

< Prev
1
2
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP10143244
Manufacturer Part Number: 231951-8

Brand	Model Number	Description
Makita	6703D	Electric Drill - Cordless Screwdriver
Makita	6705D	Electric Drill - 9.6V Cordless Screwdriver
Makita	6705DW	Screwdriver - Cordless Screwdriver
Makita	6793D	Cordless Drill - Cordless Drill
Makita	6794D	Cordless Drill - Cordless Drill
Makita	6795D	Cordless Drill - Cordless Drill
Makita	6903VD	Electric Drill - Cordless Screwdriver
Makita	6903VDW	Drill - Drill / Driver
Makita	6903VDWE	Impact Driver - 9.6V Cordless Impact Driver
Makita	6903VWD	Drill - Drill / Driver
Makita	6908D	Impact Driver - Impact Driver
Makita	6908DWA	Drill - Drill / Driver
Makita	6908DWAE	Drill - Drill / Driver
Makita	6913D	Impact Driver - Impact Driver
Makita	6913DWA	Drill - Drill / Driver
Makita	6913DWG	Drill - Drill
Makita	6914D	Impact Driver - Impact Driver
Makita	6914DWA	Drill - Drill / Driver
Makita	6914DWAE	Drill - Drill / Driver
Makita	6914DWB	Drill - Drill / Driver
Makita	6914DWBE	Drill - Drill / Driver
Makita	6916D	Impact Driver - Impact Driver
Makita	6916DWD	Drill - Drill / Driver
Makita	6916DWDE	Impact Driver - Impact Driver
Makita	6916FDWDE	Impact Driver - Impact Driver
Makita	6932FD	Drill - Drill / Driver
Makita	6932FDWDE	Impact Driver - Impact Driver
Makita	6935FD	Drill - Drill / Driver
Makita	6935FDWDE	Impact Driver - 14.4V Cordless Impact Driver
Makita	6936FD	Impact Driver - Cordless Impact Driver