Part Location Diagram of 643909-9 Makita Battery Holder
See part 17 in the diagram
( Grid squares measure 1x1 inch )

Battery Holder 643909-9

Manufactured by:
Makita
ERP Number:
ERP10153401
Part Number:
643909-9
Original Equipment Manufacturer ?
  Works with your model  9035D!
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  Works with your model   9035D!

Product Description

?

The battery holder attaches to the main frame. This part is made of metal and plastic and is available individually. It is a genuine replacement part sourced from the original manufacturer for use with blowers, saws, drills, trimmers, planers, sanders, shears, staplers, and vacuums made by Makita and DeWALT. When replacing this item a set of pliers might be required during the installation process. It will require replacing if it becomes broken.

Troubleshooting

This part works with the following brands:
  • Makita
  • DeWALT
This part works with the following products:
  • Cordless Drill
  • Drill
  • Saw
  • Circular Saw
  • Trimmer
  • Leaf Blower / Vacuum
  • Upright Vacuum
  • Electric Drill
  • Planer Jointer
  • Screwdriver

Customer Part Reviews

?
2.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    0
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    1
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Battery contact snapped

david from west suffield, Connecticut

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
643909-9
Removed the screws from the housing, then separated them, keeping all of the parts in one half. Removed the solder from the switch wires and the battery holder with a soldering. Soldered the new battery holder on. Then screwed the housings together.
Did you find this story helpful?
Thank you for voting!

The battery would not work when put all the way in place

Tom from Allentown, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
643909-9
Dis-assembled drill and replaced battery holder part. Re-assembled case and tried battery pushed all the way in and worked fine.
Did you find this story helpful?
Thank you for voting!

difficulty of putting back together the trigger mechanism

Peter from Miami, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
643909-9
Replacing this part requires complete diss-assembly (excepting the sealed motor) of the drive train and trigger mechanism. Cleanliness is critical to not get dirt particles into gear train.
It is easy once disassembled to remove old and resolder new battery holder in place but the reassembly is a little tricky
It likely took l onger overall than necessary because I let a few days lapse rather than immediately soldering and putting back in while the disassembly was fresh in my mind
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10153401
Manufacturer Part Number: 643909-9
Brand Model Number Description
Makita 1050D Planer Jointer - Planer
Makita 1050DWA Planer Jointer - Cordless Planer
Makita 1050DWD Planer Jointer - Planer
Makita 1051D Planer Jointer - 14.4V Cordless Planer
Makita 1051DWD Planer Jointer - Planer
Makita 3700 Trimmer - 1/4 Inch Cordless Trimmer
Makita 3700D Laminate Trimmer - Trimmer
Makita 3700DW Trimmer - 1/4 Inch Cordless Trimmer
Makita 4013DWP Upright Vacuum - Vacuum
Makita 4013DZ Upright Vacuum - 12V Cordless Vacuum
Makita 4033D Upright Vacuum - Vacuum
Makita 4033DWP Upright Vacuum - Vacuum
Makita 4033DZ Upright Vacuum - 14V Cordless Vacuum
Makita 4071D Upright Vacuum - Cleaner
Makita 4073D Upright Vacuum - Vacuum
Makita 4093D Upright Vacuum - Cordless Vacuum
Makita 4190D Circular Saw - Mini Circular Saw
Makita 4190DW Circular Saw - 9.6V Cordless 3-3/8&#34 Tile/Glass Saw
Makita 4191D Circular Saw - Cordless Saw
Makita 4191DWA Saw - Saw
Makita 4300D Jig Saw - Cordless Jig Saw
Makita 4300DW Saw - Saw
Makita 4307D Jig Saw - Cordless Jig Saw
Makita 4330D Jig Saw - Cordless Jig Saw
Makita 4330DWA Saw - Saw
Makita 4332D Jig Saw - Cordless Jig Saw
Makita 4332DZ Reciprocating Saw - Cordless Jig Saw
Makita 4390D Reciprocating Saw - Reciprocating Saw
Makita 4390DW Reciprocating Saw - 9.6V Cordless Recipro Saw
Makita 4399DW Saw - Saw