Part Location Diagram of 330019-04 DeWALT Plastite Screw
See part 111 in the diagram
( Grid squares measure 1x1 inch )

Plastite Screw 330019-04

Manufactured by:
DeWALT
ERP Number:
ERP9943617
Part Number:
330019-04
Original Equipment Manufacturer ?
  Works with your model  PS350K!
On Order
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(16 rated repairs) ?
  Works with your model   PS350K!

Product Description

?

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Black and Decker
  • Craftsman
  • Porter Cable
  • DeVilbiss
  • Bostitch
  • Stanley
This part works with the following products:
  • Cordless Drill
  • Hammer Drill
  • Trimmer
  • Electric Drill
  • Hedge Trimmer
  • Boring Machine
  • Circular Saw
  • Wrench
  • Angle Grinder
  • Reciprocating Saw
  • Hammer
  • Impact Driver
  • Leaf Blower / Vacuum
  • Drill
  • Sander Polisher
  • Jig Saw
  • Chainsaw
  • Grinder
  • Orbital or Palm Sander
  • Caulking Gun
  • Miter Saw
  • Nibbler & Shears
  • Lawn Mower
  • Chop Saw
  • Multi-Tool
  • Saw
  • Drill
  • Nailer
  • Miscellaneous
  • Screwdriver
  • Charger
  • Glue Gun
Part# 330019-04 replaces these:
  • 330019-04
  • P330019-04

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    4
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
The pad has come off. Looks like heads of screws sheared off. Can I just drill out the 4 screws and replace. Might be a good idea to replace the pad. My confusion- are washers needed or just make sure the posts aren't damaged?
Tamara For model number 7441 type 3 - January 3, 2023

Hello Tamara, Thank you for writing. The screws should be able to be drilled out and replaced. No washers are needed as long as the holes are not stripped. We hope this helps, good luck with this repair!

eReplacementParts Team
January 3, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(16 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken handle on recripicating saw

Steven from Coatesville, Pennsylvania

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
N104712, 682211-00, 330019-04
With battery removed, I Removed the screws
Then separated and removed clam shell handle
Careful To disconnect /remove trigger and elects out of handle
Attached 1/2 handle (not the side you put the screws in) to body
Added elects placed other half on handle
Watch wires, don\'t pinch squeeze together check ele cts and overall fit
Screw together. Enjoy!
Did you find this story helpful?
Thank you for voting!

Replace hedge trimmer handle

John from Marblehead, Massachusetts

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
90546340, 330019-04
Very simple.
Line up handle with trimmer
Screw in the screws
3 minutes maximum
Did you find this story helpful?
Thank you for voting!

Handle was broken

Marie from JOHNSTOWN, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
90546340, 330019-04
Removed the defective handle and replaced with the new one.
Did you find this story helpful?
Thank you for voting!

slight vibration

Roger from Las Vegas, Nevada

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
387542-00, 394476-00, 330019-04
removed cover exposing the motor, cleaned in and around motor, removed old brushes and installed new ones, cleaned and greased lower blade drive assembly, reassembled, and test run, proved smoother and quieter operation .
Did you find this story helpful?
Thank you for voting!

Nothing

Reginald from Orangeburg, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Took of broken parts
Replaced with new
Did you find this story helpful?
Thank you for voting!

The two torx screws holding the plastic guard in place worked loose and fell out. I couldn\'t find them, so I had to order new ones.

William from ROCKLIN, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
330019-04
1. I put the plastic guard in place
2. Inserted the screws and tightened them down.
3. I will be checking them each time I use the trimmer now.
Did you find this story helpful?
Thank you for voting!

The hedge trimmer motor quit working when attached to an electrical resource

James from FERDINAND, Indiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
90541380, 330019-04
*Remove all the screws from the external casing.
*With a small screw driver pry the old switch off of the two plastic prongs that hold the old switch in place. This is a delicate process for you do not want to break of the plastic prongs.
*Detach the two electrical wires that connect to the old switch
*Reattach these tw o wires to the new switch.
Reinsert the new switch onto the plastic prongs
Re-insert all casing screws.
Task completed.
Did you find this story helpful?
Thank you for voting!

handle broken.

John from MANITO, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
613840-00, 387558-01, 330019-04
Replaced clam shell and (1) brush.
Simple remove all screws with a T10 Torx driver.
Reuse switch. Installed brush. ( Attached wire on brush was broken when handle failed.)
Replace with new parts. SIMPLE
Did you find this story helpful?
Thank you for voting!

The blade had become badly worn and chewed up. Could not be sharpened any further

David from FISCHER, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
152617-01, 330019-04
Very simple -
Removed the top handle and blade protector. Removed screws and slipped off.
Removed screws holding the casing, and exposed the blade.
Removed screws holding blade to motor and then removed the blade.
(The blade is one inclusive unit)
Reattach the blade being certain to align with the rotor that moves the scissors back and forth. Had to adjust the blades to line up just right.
Reattach housing, I bought new screws for this.
Reattach the blade protector.
Reattach the handle.
Ready to go.
Did you find this story helpful?
Thank you for voting!

Line blade fell off

John from LITTLETON, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
681914-00, 243805-00, 330019-04
Used screw to reattach lost blade on trimmer. Also replaced lost housing screw.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9943617
Manufacturer Part Number: 330019-04
Brand Model Number Description
Black and Decker 11222 Multi-Tool - 12 Volt Multi Tool
DeWALT 1922C-36 Boring Machine - 3/8 Cdls.Dul.Drill- Taiw
Black and Decker 1922CB Cordless Drill - 7.2 Volt Cordless Drill With Charger
Black and Decker 1922R Cordless Drill - 3/8 Cordless Drill
Black and Decker 1923K Drill - Black & Decker Drill Model 1923K Parts
Black and Decker 1923K-50 Cordless Drill - 3/8 Cdls.Drl.Kt.- Italy
Black and Decker 1923K-52 Cordless Drill - 3/8 Cdls.Drl.Kt. - Spain
Black and Decker 1924K-50 Cordless Drill - 7.2v Versa Clutch Kt-Fran
Black and Decker 1924K-52 Cordless Drill - 7.2v Versa Clth.Kt.-Spain
Black and Decker 1963 Cordless Drill - 9.6v Industrial Cordless Drill
Black and Decker 1963K-50 Cordless Drill - 3/8 Cdls.Drill Kt.-Italy
Black and Decker 1963K-52 Cordless Drill - 3/8 Cdls.Drill Kt.-Spain
Black and Decker 1963R Cordless Drill - Cordless Drill
Black and Decker 1964 Cordless Drill - 9.6v Industrial Cordless Drill
Black and Decker 1964K Electric Drill - 9.6 Cdls.Ver.Kt
Black and Decker 1964K-50 Cordless Drill - 9.6v Versa Clt. Kt.-Italy
Black and Decker 1964K-52 Cordless Drill - 9.6v Versa Clut.Kt.-Spain
Black and Decker 1964R Electric Drill - 1964/Tool/Ch
Black and Decker 1965K-25 Drill - Kit, Cdls.Dril. Bel/Holl
Black and Decker 1965K-50 Cordless Drill - 12v Versa Clutch Kt.Italy
Black and Decker 1965K-52 Cordless Drill - 12v Versa Clutch Kt.Spain
Black and Decker 1965R Cordless Drill - 12 Volt Cordless Drill With Charger
Black and Decker 2141 Electric Drill - Versa Clutch Scrugun
Black and Decker 22416 Electric Drill - 3/8 Reversible Variable Speed Drill 120
DeVilbiss 22530 Multi-Tool - 12v Multi Tool
Black and Decker 23016 Jig Saw - Jig Saw
Black and Decker 23016-BDK Jig Saw - V.S. Jig Saw
Black and Decker 24442 Orbital or Palm Sander - Palm Sander
Black and Decker 2663 Cordless Drill - 9.6v Industrial Cordless Drill
Black and Decker 2664 Cordless Drill - 9.6v Industrial Cordless Drill