This is a genuine OEM sourced replacement carbon brush repair kit. It is specially manufactured for Andis clippers. Carbon brushes help to conduct electric current in an electric motor. Over time brushes tend to wear our requiring replacement. This repair kit includes includes (2) carbon brushes, (2) metal springs and (2) plastic brush caps. Please note, brush holders are sold separately. Replacing these brushes is a simple task that should only require a flat-head screwdriver. • First make sure to unplug the clippers • Remove the brush caps • Remove the old brushes • Install the new brushes • Reassemble and test the clippers
Troubleshooting
This part works with the following brands:
Andis
This part works with the following products:
Clipper Trimmer
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(3 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Blade drive broke, broken brush holders and intermittent turnoff.
Took apart, cleaned with silicone oil, brake cleaner and air. Replaced the blade drive, need the right size screwdrivers. Normal brush replacement. The circuit card had cracks in the etches on both of the line connectors. After soldering the connectors and repairing the cracks, clippers worked well. The circuit card is weak at the
... Read more connectors due the the card being so thin. Probably should replace the circuit card at some point in the future if it fails. Plastic housing screw holders were weak so I had to enforce them to get the screws tight, plastic is very thin and brittle. I suspect next time I do repair Ill need both plastic housing pieces, circuit card and whatever else wears out. The brush holder plastic screws were partly broken so I had to us small chisel/knife to break it out w/o destroying the housing, although the old brushes were still in good shape. Plastic components become brittle with use, heat and time, its plastic. Internals like the motor, switch, armature are superior as compared to the housings. Blades are very durable, light plastic hard to work with, lightweight, but not very durable.
All in all not a bad repair job, if I was to pay somebody labor..... better to buy new pair.
1. Remove plastic end caps (2 ea.)holding carbon brushes.
2. Remove and Discard old metal caps.
3. Remove and discard old springs/brushes.
4. Replace spring/brush assembly.
5. Replace metal caps.
6. Reinstall plastic end caps.
Be aware how the brushes fit into the slot to the motor. Follow the di
... Read morerections that came with the brushes and everything worked perfectly. No problems what-so-ever.
1. Removed caps with screwdriver.
2. Removed spring and old brushes
3. Replaced new carbon brushes being sure to insert at the correct position.
4. Inserted spring and screwed caps back on
5. Done!
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12006310
Manufacturer Part Number: 21812
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
