Part Location Diagram of 42-28-0395 Milwaukee Front Guide Roller Kit
See part 93 in the diagram
( Grid squares measure 1x1 inch )

Front Guide Roller Kit 42-28-0395

Manufactured by:
Milwaukee
ERP Number:
ERP10128594
Part Number:
42-28-0395
Original Equipment Manufacturer ?
  Works with your model  6238N!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   6238N!

Product Description

?

This is a genuine OEM part. The front guide roller kit is composed of high-quality metal, and is compatible with several bandsaw devices. This Milwaukee part guides the blade, both above and below the table. This part is sold individually. This kit includes the guide block, rollers, and two screws used to secure this kit to the unit. To complete this repair you will need a screwdriver.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Band Saw
  • Saw

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Not cutting right

James from Ware Shoals, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
I saw that one of the guides was worn. So I ordered the front and rear guide kits and new tires.
To replace the guide kits it just a matter of removing the screws holding the old ones on, then screwing the new ones on. Then just pull off the old tires and stretch the new tires on.
Did you find this story helpful?
Thank you for voting!

Belt bad roller guides missing

jim from revere, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Installed belts by hand. For the guides used a torx bits to remove and install the roller guide kits.
Did you find this story helpful?
Thank you for voting!

The guide lost the roller and this caused the saw not to cut

Robert from Lake Elsinore, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
42-28-0400, 42-28-0395
1- Gathered tools, loctite and table to work on.
2- Remove 2 torx head screws on each guide.
3- Dabbed some medium strength loctite on each screw prior to install
4- Installed guide and screwed in screws.
5- Tested tool and cleaned up work area.
Did you find this story helpful?
Thank you for voting!

All good

william from Apple Valley, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Remove and replace. Parts fit perfectly, the saw works again!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10128594
Manufacturer Part Number: 42-28-0395
Brand Model Number Description
Milwaukee 6230N Band Saw - Band Saw
Milwaukee 6232-6n Band Saw - Band Saw
Milwaukee 6236N Band Saw - 4-3/4" Deep Cut Two Speed Bandsaw
Milwaukee 6238N Band Saw - Band Saw
Milwaukee 6242-6 Saw - Milwaukee 6242-6 Parts