Part Location Diagram of 06-82-3060 Milwaukee 1/4-20 X 1-5/16 Fil. Hd. Tapt
See part 14 in the diagram
( Grid squares measure 1x1 inch )

1/4-20 X 1-5/16 Fil. Hd. Tapt 06-82-3060

Manufactured by:
Milwaukee
ERP Number:
ERP10118931
Part Number:
06-82-3060
Original Equipment Manufacturer ?
  Works with your model  6225!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   6225!

Product Description

?

This replacement screw is a genuine OEM sourced part, not an aftermarket imitation. It is manufactured for Milwaukee band saws. This special screw is generally used to secure the gear case. To remove or install this screw you will need a torx screwdriver. One screw is included per order.

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Band Saw
  • Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

drive worm gear and the gear shaft, one bearing

John from Catawissa, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Take the saw apart.
Did you find this story helpful?
Thank you for voting!

Missing screws and cover.

Dennis from Bristow, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
31-15-1220, 06-82-3060
1. Aligned the holes.
2. Installed the screws.
3. Installed the cover.
Did you find this story helpful?
Thank you for voting!

The bandsaw blade was walking back and forth

Steve from Houston , Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
06-82-3060
Got a screw driver and got the old screws out and put the new ones in.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10118931
Manufacturer Part Number: 06-82-3060
Brand Model Number Description
Milwaukee 0729-20 Band Saw - Bandsaw
Milwaukee 0729-21 Band Saw - Cordless Band Saw
Milwaukee 0729-50 Band Saw - V28 Euro Band Saw
Milwaukee 6223 Band Saw - Two-Speed AC/DC Band Saw
Milwaukee 6225 Band Saw - Bandsaw
Milwaukee 6226 Band Saw - Band Saw
Milwaukee 6227 Band Saw - Speed Control Bandsaw
Milwaukee 6230 Band Saw - 4-3/4 Inch Deep Cut Band Saw
Milwaukee 6230N Band Saw - Band Saw
Milwaukee 6232-4 Band Saw - 4-3/4 Inch Deep Cut Bandsaw
Milwaukee 6232-51 Saw - Milwaukee 6232-51-(678e) Parts
Milwaukee 6232-55 Band Saw - 120mm Deep Cut Band Saw
Milwaukee 6232-6n Band Saw - Band Saw
Milwaukee 6234 Band Saw - TSC Bandsaw
Milwaukee 6236 Band Saw - Two Speed Deep Cut Bandsaw
Milwaukee 6236N Band Saw - 4-3/4" Deep Cut Two Speed Bandsaw
Milwaukee 6238N Band Saw - Band Saw
Milwaukee 6242-6 Saw - Milwaukee 6242-6 Parts