eReplacementParts.com
866-322-9842
MTD Parts
Repair Parts Home  MTD Parts  Mtd Snowblower Wheels

Mtd Snowblower Wheels

Friction Wheel
Part Number: 935-0243B
In Stock, 25+ available
This item has been sourced from the original manufacturer to be used with snowblowers from MTD, Ryobi, Yard Machines, Bolens, and Yard-Man. This item is the hard rubber tire that fits onto the friction wheel and is used to rotate the friction disc. Overtime this item can wear down and need to be replaced to make good contact with the friction disc. This item is available as an individual replacement part.
Wheel, Complete 7
Part Number: 734-04063B
In Stock, 4 available
This is an authentic manufacturer sourced replacement part that is specially made for use with lawn mowers and snowblowers. It is the wheel that helps to keep the unit mobile for easy transportation. This wheel is made from durable, high-quality plastic and it is sold individually, please note the hardware to secure it is sold separately.
Shave Plate 26" - Powder Black
Part Number: 790-00121-0637
In Stock, 13 available
This replacement shave plate is a high quality item supplied directly from original equipment manufacturer for use with snow throwers. Its purpose it to scrape the ground to help pick up the snow. Shave plates are designed to absorb a lot of friction while the machine is in operation. You can tell that a snowblower has a worn shave plate because it will no longer be able to clear the sidewalk, leaving patches behind. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. This durable metal shave plate is sold individually.
Shave Plate, 26\\\
Part Number: 790-00121-0638
In Stock, 15 available
This authentic part is supplied directly from the original equipment manufacturer for use with walk-behind snowblowers. The shave plate is used to scrape snow up at the bottom rear of the auger housing. It provides an identical replacement for a missing or a worn component that came installed on a new unit. Please make sure to refer to the owners manual and the appropriate diagrams of your specific model for the correct application of this part. Keep in mind this high-quality 26
Wheel 10
Part Number: 934-04282B
In Stock, 12 available
This is a genuine manufacturer-approved wheel which is specially designed for use with Craftsman snowblowers. It is an identical replacement for a missing or damaged wheel that originally was installed on a new unit. The wheel helps to support the equipment and allow for easy transportation. This high-quality component is sold individually, it includes the durable metal rim and the rubber tire.
Friction Wheel Rubber
Part Number: 935-04054A
In Stock, 22 available
It is a genuine item that is supplied directly from the original equipment manufacturer for use with MTD and Yard Man snowthrowers. This is a high-quality replacement for a missing or worn friction wheel rubber, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is a durable component which is made of durable rubber and is sold individually.
Auger Assembly-21
Part Number: 984-04253-0637
Ships in 5 - 11 business days
This is an authentic OEM part for use with MTD, Troy-Bilt, Yard-Man and Yard Machines Snowblowers. The auger consists of rotating blades that collect snow and propel it through the auger housing and out the chute. The most common reason for replacing the auger assembly is if the snowblower isn’t throwing snow like it should and the blades look worn out. This part is sold individually. The tools that you will need to replace the auger assembly is a 1/2” socket, 3/8” socket, 7/8” socket and a 9/16” socket.
Wheel-Track Drive
Part Number: 731-1538A
In Stock, 1 available
This is a genuine Ryobi replacement part that has been sourced from the original manufacturer to be used with angle grinders. The disc attaches to the spindle shaft. This item is used to grind metal. A spanning wrench is needed to install this item. The grinding disc is sold as an individual replacement part.
Friction Wheel Ass\\\'Y.
Part Number: 05080AP
In Stock, 8 available
Wheel Assembly Idler
Part Number: 631-0032A
In Stock, 10 available
This wheel assembly idler is an original part from MTD. Compatible with many snowblowers, this component is fitted in the drive wheel assembly. Sold individually, the durable plastic assembly fastens onto the axle, assisting the track rotation. A wrench is required for the installation.
Wheel Assembly - Friction
Part Number: 984-0042C
In Stock, 9 available
It is a genuine item that is supplied directly from the original manufacturer for use with snowthrowers. The friction disc is an important component of the drive mechanism that helps to propel the equipment forward. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. If the friction disc is worn or damaged, the snowblower will move slowly, erratically or not move at all. Please make sure to check the diagrams of your model for the correct location and application of this part. Keep in mind this high-quality assembly is made of durable metal and is sold individually.
Friction Wheel Assembly, 5.5 OD
Part Number: 684-04153C
In Stock, 6 available
Shave Plate 2.25 X 21.66 Lg - MTD/Troy-Bilt Red
Part Number: 790-00117-0638
In Stock, 1 available
Wheel Assy. Comp. Slot Hub, w/o Bearings
Part Number: 734-1781
In Stock, 2 available
This is a genuine manufacturer-sourced replacement part which is specially designed for walk-behind lawn and garden equipment. It is one of the wheels which supports the unit and allows for easy transportation, this part provides an identical replacement for the original component which came with the new unit. This high-quality plastic wheel is sold individually, please note the hardware to secure it is sold separately.
X-Trac Wheel Assy., Lh, 13 X 4 X 6
Part Number: 634-04167A-0911
In Stock, 4 available
Axle, .75 x 22\'\'
Part Number: 938-04493
In Stock, 2 available
Axle, Auger, 24
Part Number: 711-04285A
In Stock, 2 available
Wheel, 9 x 2.125
Part Number: 734-2010B
In Stock, 1 available
This is a genuine MTD replacement part that is sourced from the original manufacturer to be used with snowthrowers. The wheel assembly connects to the rear of the auger housing and is used to move the machine. This item is available as an individual replacement part, please note two wheels are required.
Auger Axle, 28
Part Number: 711-06145
In Stock, 2 available
This is a genuine replacement part sourced directly from the manufacturer. The auger axle is commonly found in snowblowers and snow throwers from MTD, Yard Machines, and Yard Man. This part is made of metal, and is used to hold the augers in the auger housing. You may require a wrench when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. The auger axle is sold as an individual replacement part.
Service Drive Wheel Kit
Part Number: 753-05173A
In Stock, 7 available
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy