866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Briggs and Stratton Parts  Briggs And Stratton Engine Valves

Briggs And Stratton Engine Valves

Valve-Fuel Shut Off
Part Number: 698183
In Stock, 25+ available
This is a genuine OEM part that is intended to be used with lawnmower engines from Briggs & Stratton, Toro, and Murray. The valve attaches to the incoming fuel line and is used to regulate the flow of fuel that enters the engine. This item is available as an individual replacement part.
Valve-Fuel Inlet
Part Number: 394681
In Stock, 20 available
The float valve is used to allow fuel into the float chamber when the chamber has been drained and to stop fuel from entering the chamber when it is full. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This authentic part is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model to ensure the correct repair procedure. Keep in mind this high-quality valve-fuel inlet is sold as an individual item.
Valve-Fuel Shut Off
Part Number: 698180
In Stock, 17 available
This is an authentic OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The shut-off valve attaches to the bottom of the fuel tank and is used to link the fuel line and to control the flow of fuel that goes to the engine. This item is available as an individual replacement part.
Body-Fuel Pump
Part Number: 691896
In Stock, 8 available
This is an original part from Briggs & Stratton. The fuel pump body is made of durable plastic, and is compatible with many small lawn and garden engines. This part is fitted within the carburetor and the diaphragm. Hoses are attached from fuel pump body to the tank and carburetor. This part is sold individually. A hex key and a wrench are often needed for the removal and replacement.
Keeper-Valve
Part Number: 499586
In Stock, 6 available
It is an authentic item that is supplied by the original equipment manufacturer for use with Toro riding lawn mowers and garden tractors. This is a specially designed keeper that helps to secure a valve, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality component is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.
Valve-Fuel Shut Off
Part Number: 698182
In Stock, 11 available
This is a genuine OEM sourced replacement part that is intended to be used with snowthrowers from Toro and small engines from Briggs & Stratton. The shut-off valve attaches to the fuel tank and is used to link the fuel line to regulate the flow of fuel. This item is sold as an individual replacement part.
Valve-Fuel Shut Off
Part Number: 716111
In Stock, 6 available
This genuine item is supplied by the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The valve allows a user to stop the flow of fuel. Unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality fuel shut off valve is made of durable metal with some plastic components and is sold individually.
Retainer-Valve
Part Number: 692194
In Stock, 5 available
This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.
Valve-Exhaust
Part Number: 697576
In Stock, 5 available
This is an authentic Kawasaki part which is specially manufactured for use with small engines commonly installed on a variety of lawn and garden equipment. The exhaust valve is used to expel exhaust gases from the engine after fuel is fired in the cylinder. It is an identical replacement for a damaged or a missing component that was installed on a new unit. This exhaust valve is sold as an individual item. Please see the model diagrams to ensure the proper repair procedure.
Valve-Exhaust
Part Number: 792868
In Stock, 7 available
Valve--Intake
Part Number: 791935
In Stock, 11 available
Valve-Intake
Part Number: 792200
Ships in 4 - 7 business days
This is an authentic OEM component from Briggs & Stratton. The intake valve is compatible with many small engines, and is sold individually. This durable metal component is fitted inside the cylinder head, managing the proper amount of fuel and air flowing into the carburetor. For the repair, you may need a wrench set, screwdriver and a socket set.
Tappet-Valve
Part Number: 690977
In Stock, 12 available
The valve tappet attaches to the push rod. It is made out of metal and is sold individually. This is a Briggs & Stratton and Toro replacement part directly sourced from the manufacturer for use in engines. It may require a set of pliers during installation. This part may become broken and will need to be replaced.
Retainer-Valve
Part Number: 690656
In Stock, 4 available
Valve-Fuel Shut Off
Part Number: 592840
In Stock, 1 available
The fuel shut off valve attaches to the handle shutoff valve. This item is made of metal and is available as an individual replacement part. It might require a screwdriver and an adjustable wrench to replace this item if it becomes broken. This is an original Briggs & Stratton and Toro part for use in engines, snowthrowers, tillers, lawn mowers, and lawn tractors.
Tappet--Valve
Part Number: 690564
In Stock, 5 available
Exhaust Valve
Part Number: 807681
In Stock, 5 available
This is an authentic Kawasaki part which is specially manufactured for Briggs and Stratton engines which are commonly installed on a variety of lawn and garden equipment. The exhaust valve is used to expel exhaust gases from the engine after fuel is fired in the cylinder. It is an identical replacement for a damaged or a missing component that was installed on a new unit. This exhaust valve is sold as an individual item. Please see the parts diagrams to ensure the proper repair procedure.
Valve-Intake
Part Number: 261044S
In Stock, 5 available
This is an OEM replacement part sourced directly from the manufacturer and is used with various Briggs and Stratton and Toro lawn equipment and small engines. The intake valve controls the flow of the fuel vapors. Over time the valves can stick and cause pits, cracks or grooves that can cause the engine to loose power and fuel efficiency. The intake valve is made of a durable metal and is sold separately.
Valve-Needle
Part Number: 690266
In Stock, 2 available
Valve-Exhaust
Part Number: 590394
In Stock, 1 available
This is an original Briggs & Stratton and Toro part for use in engines, generators, and lawn mowers. The exhaust valve goes next to the valve spring. This item is sold individually and is made of metal. A set of pliers may be needed during the replacement of this part. It will need to be replaced if it breaks.
Show More
no image
Part Number:
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy