eReplacementParts.com
866-322-9842
Hitachi Parts
Repair Parts Home  Hitachi Parts  Hitachi Compressor Valves

Hitachi Compressor Valves

Auto Unloading Valve
Part Number: 885426
In Stock, 10 available
Non-Return Valve (Ec 12 Early Models)
Part Number: 881-581
In Stock, 9 available
The non-return valve attaches to the tank. It is made of metal and is sold individually. This part is an OEM from Hitachi for use in air compressors. It may require a screwdriver and a wrench set during installation. Over time this part may break and will need to be replaced.
Rubber, F/Non-Return Valve
Part Number: 160-560
In Stock, 8 available
Non Return Valve
Part Number: 160591
In Stock, 7 available
This component is supplied by the original manufacturer for use with Hitachi air compressors. This non-return valve is also known as a check valve. It lets pressurized air flow into the tank and prevents it from flowing back into the pump. Note, this high-quality component is made of durable metal and is sold individually. You would need a wrench to replace this valve. When replacing this part make sure to unplug the air compressor and release the air from the tank before disconnecting the tubes.
Rubber, Fi Non-Return Valve
Part Number: 160-582
In Stock, 5 available
It is a genuine item that is supplied by the original equipment manufacturer for use with Hitachi air compressors. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit. Keep in mind this high-quality non-return valve is made of durable rubber material and is sold as an individual item. refer to the appropriate diagrams for your model to ensure the correct repair procedure.
Start Valve
Part Number: 160615
In Stock, 3 available
This is an authentic Hitachi replacement part manufactured for use with air compressors. The special start valve is used to bleed air out of the cylinder during the first few revolutions of the motor when the compressor is cold started. This start valve is available as an individual replacement part.
Valve Plate Set
Part Number: 881-556
In Stock, 3 available
The valve plate set is sold as a kit that contains all the necessary parts. They go between the cast iron cylinder and the head with start valve. These are genuine OEM sourced parts which are specifically designed for use with Hitachi compressors. During the installation process, a socket set and a wrench set might be needed to replace these items. These parts are made out of metal and will need to be replaced if they break.
Non Return Valve
Part Number: 882-607
Ships in 15 - 21 business days
Valve Plate Kit
Part Number: 885551
In Stock, 2 available
Start Valve
Part Number: 887060
Ships in 15 - 21 business days
Valve
Part Number: 885475
In Stock, 6 available
This high-quality replacement part is supplied by the original equipment manufacturer for use with Hitachi air compressors. Reed valves are commonly utilized in two-stroke engines, where they control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase beneath the piston. This part is made of durable metal and is sold individually. Check the owners manual and the appropriate diagrams of your model for the exact location and the correct installation of this component.
Valve Plate Component
Part Number: 887525
In Stock, 6 available
This is an original Hitachi replacement part. The valve plate component is designed by the manufacturer for use in a pancake compressor. This part is made of metal, and is placed between the cylinder head and the motor. You may require a screwdriver or wrench when replacing this item. This part is sold individually.
Head With Start Valve
Part Number: 160581
Ships in 15 - 21 business days
Un-Loader Valve
Part Number: 724033
In Stock, 4 available
Valve Plate And Set Of Gaskets
Part Number: 887528
Ships in 15 - 21 business days
Set Valve Plate
Part Number: 885508
Ships in 15 - 21 business days
Check Valve
Part Number: 887522
In Stock, 1 available
Drain Valve
Part Number: 724016
Ships in 15 - 21 business days
This component is supplied by the original equipment manufacturer. It is specially designed for use with Hitachi air compressors. This item provides an identical replacement for a missing or a faulty part that was installed on a new unit. When you use a compressor the air that is compressed inside the tank will condensate and leave water inside the tank. If it is left in the tank too long it can start to rust out the inside of the tank. The drain valve should be opened up and let the water drain out. It is made of high-quality metal and is sold individually. Make sure to refer to the diagrams and the manual of your model for the correct application of this component.
Pilot Valve
Part Number: 724149
Ships in 15 - 21 business days
Valve Plate Assembly
Part Number: 724152
Ships in 15 - 21 business days
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy