866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Briggs and Stratton Parts  Briggs And Stratton Engine Springs

Briggs And Stratton Engine Springs

Push Rod
Part Number: 690982
Ships in 4 - 7 business days
This is an Genuine OEM replacement part is made out of Aluminum, it is sold individually. The Push Rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately.
Air Vane Spring
Part Number: 790849
Ships in 4 - 7 business days
This is a manufacturer approved replacement part designed for use with a variety of lawn and garden engines. The air vane spring maintains the proper tension on the air vane choking system. If it is broken, it can cause the engine to not start. To replace it you will need pliers.
Governed Idle Spring
Part Number: 691859
In Stock, 2 available
This is an Authentic OEM replacement part used on Briggs and Stratton Engines. This is the Spring that connects to the Governor, opening or closing the throttle. This is a Metal Spring and it is Sold Individually. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it should be replaced. No tools are required to replace it.

You may need a Screwdriver and Pliers to replace this item.
Rewind Starter Spring
Part Number: 490179
In Stock, 14 available
Governor Spring
Part Number: 691297
In Stock, 25+ available
This spring-governor is an OEM part which is designed for Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. It applies tension on the governor. The governor system is like a cruise control system. It maintains the speed by adjusting the carburetor. Over time it may wear out and stretch eventually requiring a replacement. It is made of a high-quality metal and is sold as an individual component. Refer to the diagrams for your model for the exact location and the correct installation of this hardware. You may need a screwdriver to remove the air filter to gain access and replace the old part.
Governor Spring
Part Number: 699056
In Stock, 5 available
This governor spring is an OEM part direct from Briggs & Stratton. Compatible with many small, lawn and garden engines, the metal spring creates the necessary tension for the throttle. This in turn, manages the speed of the engine. A pair of pliers and a screwdriver are needed for the installation. The governor spring is sold individually.
Governor Spring
Part Number: 698719
In Stock, 25+ available
This is an OEM sourced replacement part designed for use with Briggs and Stratton engines. A governor spring regulates the engine RPM's under load conditions. This spring is made out of metal and it is sold individually.

Replacing this item you would need a screwdriver and pliers.
Spring--Governor Link
Part Number: 691842
In Stock, 19 available
A genuine item which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is an identical replacement for a damaged or missing governor link spring which was originally installed on a new unit, make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
Spring-Choke Return
Part Number: 690354
In Stock, 21 available
This choke return spring is an OEM direct from Briggs & Stratton. The metal spring is compatible with several small engines. This component works from the choke system, applying the necessary tension to maintain the choke lever position. A screwdriver, wrench and pair of pliers are often required for the repair. The choke return spring is sold individually.
Spring-Governor
Part Number: 793604
In Stock, 22 available
It is a genuine item that is supplied by the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This part provides an identical replacement for a missing or a damaged spring-governor that was originally installed on a new unit. The purpose of this spring is to apply tension to the governor link, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality spring is made of durable metal and is sold individually.
Governor Spring
Part Number: 796484
In Stock, 25+ available
The governor spring attaches to the control bracket and helps to control the speed of the engine. This is an OEM replacement part for Briggs and Stratton engines and is available individually. It is a very small part made of metal and will need replacing if it becomes lost, bent or broken. While replacing the spring a screwdriver may be required to help in the installation.
Spring-Governor (Yellow)
Part Number: 690251
In Stock, 6 available
This item has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton. The metal spring is used to actuate the governor control assembly. This spring is sold as an individual replacement part.
Link-Air
Part Number: 690347
Ships in 4 - 7 business days
Link--Choke
Part Number: 691840
In Stock, 24 available
A genuine item which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is an identical replacement for a damaged or missing link-choke that was originally installed on a new unit. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually. You may need a screwdriver and pliers to take apart the housing to perform this repair.
Rod-Push (Intake)(Steel)
Part Number: 691836
In Stock, 25+ available
This is a genuine manufacturer-approved replacement part which is specially designed for use on Briggs and Stratton engines commonly installed on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Keep in mind this high-quality part is made of durable metal and is sold individually.
Spring-Friction
Part Number: 691855
In Stock, 6 available
Spring-Governor
Part Number: 796260
Backorder: No ETA
The governor spring is made out of metal and helps to control the speed of the engine. This authentic item is supplied directly from the original equipment manufacturer for use with Briggs & Stratton generators and Toro snowthrowers, tillers, and blower-vacuums. If it becomes lost or broken it will need to be replaced. A nutdriver may be necessary to help replace this part which is sold individually.
Spring-Governor
Part Number: 691292
In Stock, 25+ available
This is a genuine Briggs and Stratton part that has been OEM sourced to ensure a high-level of quality. The metal governor spring is intended to be used with small engines. This spring is used to return the throttle lever after a change in the motor's output based on the load controlled by the governor. This item is available as an individual replacement part.
Spring-Brake
Part Number: 692135
In Stock, 3 available
This is an authentic manufacturer-sourced part which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or damaged spring that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.
Spring-Governor
Part Number: 596459
Ships in 4 - 7 business days
This is an authentic replacement part manufactured for use with Briggs and Stratton small engines with mechanical governors. The spring is used to hold the throttle at the optimal maximum speed after the governor adjusts the throttle based on changing engine load. This governor spring is available as an individual replacement part.
Show More
no image
Part Number:
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy