866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Briggs and Stratton Parts  Briggs And Stratton Engine Rings

Briggs And Stratton Engine Rings

Float Bowl Gasket
Part Number: 693981
Ships in 4 - 7 business days
This is a Genuine OEM Authorized Gasket used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.

When replacing this Gasket you would need a Screwdriver and a set of Wrenches.
Float Bowl Gasket
Part Number: 281165S
In Stock, 21 available
This is a Genuine OEM replacement part used on variety of Lawn and Garden Equipment Engines. This part is made out of Rubber and it is sold individually. If the carburetor is leaking fuel it is recommended to replace the Bowl Gasket. Gaskets and O-rings are a common source of problems. They eventually shrink, causing fuel and air leaks that lead to poor engine performance.
O-Ring
Part Number: 691917
Ships in 4 - 7 business days
This item is an authentic OEM part. It is used in various models of Toro tractors and Briggs & Stratton engines. An o-ring is used to seal and protect in between rigid connected pieces. Proper seal is needed for machine functioning. Please ensure that correct size/shape o-ring is being used, as many machines use multiple types throughout. Sold individually.
Dipstick Tube Seal
Part Number: 281370S
In Stock, 6 available
This item is a genuine replacement part that has been OEM sourced and is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The rubber seal is used to prevent oil from leaking at the connection between the bottom of the oil fill tube and the crankcase. This item also allows the fill tube to firmly sit into the case. The dipstick tube seal if available as an individual replacement part.
Seal-O Ring
Part Number: 270344S
In Stock, 20 available
This authentic OEM replacement part fits a variety of Toro and Briggs & Stratton engines. An O ring is used to retain pressure between rigid parts. Its flexible material allows it to create a tight seal. Many different sizes of O ring are used in these engines; consult manual to be sure of correct placement. Sold individually.
Valve Seal
Part Number: 690968
In Stock, 16 available
This is a genuine OEM part. The Briggs & Stratton valve seal is used on many lawn tractor machines. The metal part stops oil from moving into the cylinder from the valve stem. This item is often fastened to the intake valve and the valve keeper. A screwdriver, socket set and wrench set are required for the installation. The metal valve seal is sold individually.
Seal--O Ring (Intake Manifold)
Part Number: 692138
In Stock, 3 available
This item has been sourced from the original manufacturer to be used with lawnmower engines from Briggs & Stratton and Toro. The o-ring is used to seal the connection between the intake manifold and the cylinder head assembly. This o-ring is available as an individual replacement part.
Gasket-Float Bowl (1/8" Thick)
Part Number: 796610
In Stock, 16 available
It is a genuine item that is supplied by the original equipment manufacturer for use with Briggs and Stratton engines. The float bowl gasket goes between the carburetor float and the main jet and helps to provide a seal. A socket set may be needed when replacing this part. Keep in mind that this gasket is made of rubber and is sold individually.
Gasket-Float Bowl
Part Number: 690994
In Stock, 7 available
This is a genuine manufacturer sourced replacement part that is specially designed for Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. The purpose of this gasket is to create an air-tight seal for the float bowl, over time it may deteriorate, become brittle and crack eventually requiring replacement to maintain peak performance. It is made from high quality rubber material and it is sold individually.
Seal-Dipstick Tube
Part Number: 692296
Ships in 4 - 7 business days
It is an authentic manufacturer-sourced replacement component is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This part is utilized to provide an air-tight seal for the dipstick tube, over time it may wear out and begin to crack eventually requiring a replacement. It is a high-quality item that is made of durable rubber and is sold individually.
Cap-Spring
Part Number: 690766
In Stock, 10 available
It is an OEM component which is designed for Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. The cap helps to secure the spring in the pump. Over time it may wear out, get damaged or lost eventually requiring a replacement. To ensure the exact location and the correct application of this hardware, refer to the appropriate diagrams of your specific model. This high-quality cap-spring is made of durable metal and is sold as an individual component. You may need a screwdriver and a wrench set to perform this repair.
Valve Seal
Part Number: 691963
In Stock, 17 available
It is an authentic OEM supplied part that is designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This part provides a seal for the tappet valve. It is an identical replacement for a missing or a faulty part that was included with a new unit. Please make sure to check the appropriate diagrams of your model for exact location and application of this component. Keep in mind this high-quality valve seal is sold individually.
Seal--Dipstick Tube
Part Number: 691032
In Stock, 10 available
This is an authentic OEM sourced replacement part which is specially designed for use with lawn and garden equipment. The purpose of this part is to provide a tight seal between connected parts, over time it may wear out and begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality seal is made of durable rubber and is sold individually.
Retainer-Seal
Part Number: 697478
In Stock, 4 available
This is a genuine Briggs and Stratton part for use with Lawn and Garden Equipment Engines. The carburetor needle valve seat gasket makes a seal between the needle valve and the base of the carburetor. This part is sold individually. The most common reason for replacing a gasket is if the carburetor is leaking fuel. The tool that you will need to replace the seal gasket is a 10mm socket.
Ring Set (Standard)
Part Number: 594437
In Stock, 8 available
This is an authentic Briggs & Stratton part that has been OEM sourced to ensure a high level of quality. The ring set is intended to be used with small engines. Piston rings are used to form a seal between the piston and the cylinder wall. The seal separates the crankcase and the combustion chamber. If the ring becomes damaged the seal will be broken and will result in a loss of compression. The piston rings are sold in a complete set.
Seal-O Ring (Fuel Transfer Tube)
Part Number: 690988
In Stock, 5 available
This is a genuine OEM sourced replacement o-ring which is utilized with Briggs and Stratton engines commonly installed on lawn and garden equipment. This component provides an air-tight seal for the fuel transfer tube, over time the material may become brittle and crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable rubber and is sold individually.
Seal-O Ring (Dipstick Tube)
Part Number: 691031
In Stock, 15 available
This authentic item is supplied directly from the original equipment manufacturer for use with engines, outboard motors, portable generators, snowthrowers, and lawn mowers made by Briggs & Stratton and Toro. The o-ring seal attaches to the dipstick. When replacing this part a socket set might be required during the installation process. It is made out of rubber and will need to be replaced if it breaks. This part is available as an individual replacement.
Ring Set
Part Number: 792026
In Stock, 12 available
This replacement piston ring is a high-quality item that is sourced directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. A worn or broken piston ring will allow combustion gasses to escape the seal and enter the crankcase causing low compression and the loss of power. If compression is reduced significantly, the engine will not be able to run at all. Please note this high-quality set is sold individually, keep in mind it includes four durable metal rings. Make sure to refer to the appropriate diagrams of your model for the correct location and application of these items.
Gasket-Float Bowl
Part Number: 694920
In Stock, 8 available
This is a genuine replacement part manufactured for use with small engines. This float bowl gasket is used to seal the float bowl where it connects to the carburetor body. Gaskets can wear out over time causing fuel leaks, also it is recommended to replace gaskets when servicing the carburetor to ensure a good seal when it is reinstalled. This float bowl gasket is available individually.
Seal-O Ring
Part Number: 690589
In Stock, 3 available
This is an authentic replacement part manufactured for use with lawnmower small engines. The o-ring seal is commonly used to seal the oil pump cover. This o-ring is sold as an individual replacement part, please see model diagram for associative parts.
Show More
no image
Part Number:
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy