Pan Head Torx Screw 06-82-5314

Description:

This is a genuine Milwaukee Taptite® Pan Head Torx Screw for use with a variety of equipment. Use only appropriate tools of correct size to tighten and loosen the screw while following the basic common safety precautions. Size 10-24 X 1/2.

Frequently Purchased With

Shoe Assembly..
$5.89

Depth Shaft
$5.50

Depth Lever
$4.99

Depth Shaft
$3.99

Lower Guard Le..
$4.99

Depth Lever
$4.99

Lever Depth Bl..
$5.19

Blade Pulley T..
$12.33

Compatibility

This part is compatible with the following machines:

Milwaukee

6230-22 (SER 383B) Cordless Metal Cutting Circular Saw
6230-22 (SER 383B) Cordless Metal Cutting Circular Saw
6310-20 (SER 057C) Cordless Circular Saw
6310-20 (SER 057C) Cordless Circular Saw
0730-20 (SER A57B) Cordless Circular Saw
0730-20 (SER A57B) Cordless Circular Saw
0740-22 (SER A94A) Cordless Metal Cutting Saw
0730-22 (SER A57A) Cordless Circular Saw
0730-22 (SER A57A) Cordless Circular Saw
2630-20 (SER B57A) 18 Volt Circular Saw
2630-20 (SER B57A) 18 Volt Circular Saw
2630-22 (SER B57A) 18 Volt Circular Saw
2630-22 (SER B57A) 18 Volt Circular Saw
6394 (SER 984B) 7-1/4" Circular Saw w/Tilt-Lok Handle
6394 (SER 984B) 7-1/4" Circular Saw w/Tilt-Lok Handle
6486-20 (SER 401A) METCO PANEL SAW MOTOR 110V
6486-68 (SER 406A) O.E.M. Saw Motor
6490 (SER 799A) 10" Magnum Miter Saw
6490 (SER 799A) 10" Magnum Miter Saw
6496 (SER 882A) Sliding Compound Miter Saw
6496 (SER 882A) Sliding Compound Miter Saw
6496 (SER 882B) Sliding Compound Miter Saw
6496 (SER 882B) Sliding Compound Miter Saw
6126 (SER 788B) Random Orbit Sander
6126 (SER 788C) Random Orbit Sander
6126 (SER 788D) Random Orbit Sander
6126 (SER 788E) Orbit Sander
5619-20/5619-29 (SER 280B) 1-3/4 H.P. D-Handle Router
2682-20 (C74A) Cordless 5-3/8" Metal Cutting Saw
6509-31 (SER C24A) Sawzall Reciprocating Saw
6509-31 (SER C24B) Sawzall Reciprocating Saw
6519-30 (C25A) Sawzall Reciprocating Saw
6519-30 (C25B) Sawzall Reciprocating Saw
6394-21 (SER 984C) 7-1/4" Circular Saw
6394-21 (SER 984C) 7-1/4" Circular Saw
6232-20 (D51A) Deep Cut Bandsaw
6232-20 (D51A) Deep Cut Bandsaw
6238-20 (D52A) Deep Cut AC/DC Bandsaw
6238-20 (D52A) Deep Cut AC/DC Bandsaw
6519-31 (C25A) Sawzall Reciprocating Saw
6519-31 (C25B) Sawzall Reciprocating Saw
48-10-5600 Router Plunge Base Assembly
48-10-5615 Router BodyGrip Assembly
6509-31 (SER C24C) Sawzall Reciprocating Saw
2729-22 M18 Fuel Deep Cut Bandsaw
2729-22 M18 Fuel Deep Cut Bandsaw
2682-22 Cordless 5-3/8" Metal Cutting Saw
2707-20 M18 Fuel 1/2" Hole-Hawg
2707-22 M18 Fuel 1/2" Hole-Hawg
2729-20 M18 Fuel Deep Cut Bandsaw
2729-20 M18 Fuel Deep Cut Bandsaw
2729-21 M18 Fuel Deep Cut Bandsaw
2729-21 M18 Fuel Deep Cut Bandsaw
2730-20 Cordless M18 Fuel Circular Saw
2730-20 Cordless M18 Fuel Circular Saw
2730-21 Cordless M18 Fuel Circular Saw
2730-21 Cordless M18 Fuel Circular Saw
2731-21 Cordless M18 Fuel 7-1/4" Circular Saw
2731-21 Cordless M18 Fuel 7-1/4" Circular Saw
2731-22 Cordless M18 Fuel 7-1/4" Circular Saw
2731-22 Cordless M18 Fuel 7-1/4" Circular Saw
2708-20 7/16" Hex Hole-Hawg
6509-31 (SER C24D) Sawzall Reciprocating Saw
6232-20 Deep Cut Bandsaw
5615-20 1-3/4 H.P. Body Grip Router

Expand the 130 compatible machines

Products Compatibility

This item works with the following types of products:

• Band Saw
• Circular Saw
• Engine
• Miter Saw
• Router
• Sander
• Saw

Expand List

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Band Saw

Parts Used:

Blade Pulley Tire - 45-69-0010

Pan Head Torx Screw - 06-82-5314

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

, Torx bit

Band saw wheel tires dryed out and broken.

Removed wheels from bandsaw. Replaced tires with new ones. Installed wheels on saw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Lever, Guard - 44-10-0420

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

broken handle on a circuilar saw

simple replacement by removing the the attachment screw and replacing the handle . retighten attachment screw . all finished in less than 5 minutes.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Safty gaurd broke

Removed the blade.
Remove Saturday screws and dust extract screws.
Remove spring and guard.
Install new lower guard and reverse above steps.
Install new handle and replace screw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Shoe Assembly - 45-16-0030

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Allen wrench

Shoe assembly fell in hole

I took 2 minutes so easy and I am not kidding!!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Lever, Guard - 44-10-0420

Lower Guard - 28-41-0958

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers, Snap ring pliers

Replaced cheap plastic guard for magnesium guard

Removed top guard, removed snap ring on bottom guard, spring on bottom guard, bottom guard and replaced. Put lever on and screwed lever tight. All done!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Lower Guard Lever - 44-10-1008

Lower Guard - 28-41-0101

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Spring clamp needle pliers

The saw was dropped, broke the lower guard and lever.

Take off the blade. Remove the snap ring to remove the guard. Make sure to unhook the guard spring. Clean and grease if need be, then replace parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Guard Lower Machined Assy - 28-41-1032

Guard Spring - 40-50-0045

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wrench Set, Snap ring pliers

Blade guard broken

Removed outer blade cover - removed snap ring retainer for blade guard - installed new guard & re-installed cover

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Hex Key - 49-96-0600

Depth Lever - 44-10-0007

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Missing parts

Just replaced missing parts on outside of circular saw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Retaining Ring Ext - 34-60-0860

Lever, Guard - 44-10-0420

Lower Guard - 28-41-0958

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Snap ring pliers

Blade guard broke on circular saw

Only had to remove the blade, the blade backer and the retaining spring. Very simple and much less than replacing the entire tool.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Circular Saw

Parts Used:

Pan Head Torx Screw - 06-82-5314

Depth Shaft Lever Assy - 14-73-0256

Lever Depth Black - 31-52-0017

Washer - 45-88-8461

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

Handle bar was not working

Removed the stripped lever and replaced with new

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

2 Reviews

Click to filter by ratings:

5 stars

2

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Correct part arrived, no problem

The part was correct and arrived soon enough given shipping problems these days.

Guest - January 26, 2022 Verified Purchase

Easy to fix

The screws for my sawsall came out and I couldn't find them. Looked everywhere but no luck. Found them here and they were very easy to replace.

GLENN - October 3, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Pan Head Torx Screw