Pan Head Screw 06-82-8864

Specifications

Dimension: 10-24 X 1/2-inch

Description:

Genuine Milwaukee replacement part, it is sold individually.

The 06-82-8864 screw is used in various places as a fastener. Commonly used in power tools, it is compatible with the models listed below.

A Torx or flat head screwdriver is needed to properly tighten this screw.

Frequently Purchased With

Bumper
$5.37

Blade Pulley T..
$12.33

Bumper
$9.81

Cam Follower B..
$4.99

Rear Blade Gui..
$20.79

10-24 X 1/2 Pa..
$4.99

Front Blade Gu..
$18.83

Blade Guard
$5.19

Compatibility

This part is compatible with the following machines:

Milwaukee

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Band Saw
• Grinder
• Miter Saw
• Sander
• Saw

Repair Instructions: Submitted by Customers Like You

Tool Type:

Band Saw

Parts Used:

Cord Protector - 44-76-0210

Pan Head Screw - 06-82-8864

Power Cord (18-foot) - 22-64-2000

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Torx Wrench

Existing cord was dry rotted and hard

1. Removed 1/2 of the handle
2. Used small flat head to disconnect exiting cord from trigger
3. Removed ground wire
4. Installed new cord protector and cord
5, Connected cord to trigger and connected ground
6. Re-installed handle Test ran Saw

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Pan Head Screw - 06-82-8864

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Screws missing

replaced missing screws

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Carbon Brush With Spring - 22-18-0670

Screw - 06-82-5574

Blade Pulley Tire - 45-69-0010

Pulley Washer - 45-88-7165

Snap Ring - 34-60-1400

Blade Pulley - 28-95-0120

Bumper - 42-38-0040

Gear Case - 28-14-2110

Pan Head Screw - 06-82-8864

Taptite Torx Screw - 06-82-5330

Bandsaw Blade - 48-39-0510

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Impact drill with torx screwdriver bits

Broken case and handle

Followed the very good instructions on the video......step by step, easy........I did have to jump to a different video to figure out the "bushing" replacement in the new case (that should have been mentioned in the case replacement video to make it easier) but it was also easy once I figured it out

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Bumper - 42-38-0040

Pan Head Screw - 06-82-8864

Bandsaw Blade - 48-39-0510

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Torx wrench

Needed and new bumper and blade

Removed old bandsaw blade,
Removed broken bumper,
Installed new bumper using new screws
Installed new bandsaw blade.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Blade Pulley Tire - 45-69-0010

Pulley Washer - 45-88-7165

Snap Ring - 34-60-1400

Pan Head Screw - 06-82-8864

Bumper - 42-38-0042

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Snap ring pliers

Missing parts

I removed the blade pulley cover, then installed the hub washer and the snap ring. Then screwed the cover back on. I then simply stretched the new tire around the blade pulley. Then used the screws to mount the bumper to the saw.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Band Saw

Parts Used:

Screw - 06-82-5574

Pan Head Screw - 06-82-8864

Taptite Torx Screw - 06-82-5330

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, thread taps, torx bits

Blade guide screws and support screws were stripped and would not hold components tightly

I removed screws, blade guides and support. I tapped holes to clean and thread. Attached components with new screws and tightened securely.
Bandsaw now operating as designed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

2 Reviews

Click to filter by ratings:

5 stars

2

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Great Parts

Have always had the best results in finding the parts I need for repairs thru Ereplacment Parts ! Fast service & shipping !! Quality parts everytime ! Thank you

Paul - December 6, 2022 Verified Purchase

Easy

Perfect condition

Dale - November 4, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Pan Head Screw