Product Information
Description:
| This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-82-5275 Screw is to secure the Belt Clip or the Bit Clip on the models shown below. This screw requires a Torx head or a flat head screwdriver. |
Frequently Purchased With
Compatibility
the 68 compatible machines
This part is compatible with the following machines:
Milwaukee
5192 (SER 669D) Grinder
49-24-0155 (SER A45A) Light
49-24-0165 (SER A51A) Light
0602-20 (SER 307A) 12V 3/8" Compact Series Driver-Drill
0612-20 (SER 311A) 14.4 Volt 1/2" Compact Driver-Drill
0615-20 (SER A76A) 14.4 Volt 1/2" Lok-Tor II Driver-Drill
0615-20 (SER A76B) 14.4 Volt 1/2" Lok-Tor II Driver-Drill
0615-20 (SER A76C) 14.4 Volt 1/2" Lok-Tor II Driver-Drill
0625-20 (SER A77A) 18 Volt 1/2" Lok-Tor II Driver-Drill
2601-20 (SER B28A) 1/2" Compact Driver Drill
0617-20 (SER A78A) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-20 (SER A78A) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-20 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-20 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0627-20 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0627-20 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0724-20 (SER A55A) Cordless 1/2" Hammer Drill
0724-20 (SER A55A) Cordless 1/2" Hammer Drill
0724-20 (SER A55A) Cordless 1/2" Hammer Drill
49-24-0185 (SER A61A) Cordless Worklight
0724-20 (SER A55B) Cordless 28V 1/2" Hammer-Drill
0724-20 (SER A55B) Cordless 28V 1/2" Hammer-Drill
0724-20 (SER A55B) Cordless 28V 1/2" Hammer-Drill
0627-24 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0627-24 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0617-24 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-24 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0625-24 (SER A77A) 18 Volt 1/2" Lok-Tor II Driver Drill
0615-24 (SER A76C) 14.4 Volt 1/2" Lok-Tor II Driver Drill
0612-50 (SER 311A) 14.4 Volt Compact Driver-Drill
0612-22 (SER 311A) 14.4 Volt 1/2" Compact Driver-Drill
0602-22 (SER 307A) 12 Volt 3/8" Compact Driver-Drill
0724-24 (SER A55A) Cordless 28V 1/2" Hammer-Drill
0724-24 (SER A55A) Cordless 28V 1/2" Hammer-Drill
49-24-0155 (SER A45A) Light
49-24-0165 (SER A51A) Light
0602-20 (SER 307A) 12V 3/8" Compact Series Driver-Drill
0612-20 (SER 311A) 14.4 Volt 1/2" Compact Driver-Drill
0615-20 (SER A76A) 14.4 Volt 1/2" Lok-Tor II Driver-Drill
0615-20 (SER A76B) 14.4 Volt 1/2" Lok-Tor II Driver-Drill
0615-20 (SER A76C) 14.4 Volt 1/2" Lok-Tor II Driver-Drill
0625-20 (SER A77A) 18 Volt 1/2" Lok-Tor II Driver-Drill
2601-20 (SER B28A) 1/2" Compact Driver Drill
0617-20 (SER A78A) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-20 (SER A78A) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-20 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-20 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0627-20 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0627-20 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0724-20 (SER A55A) Cordless 1/2" Hammer Drill
0724-20 (SER A55A) Cordless 1/2" Hammer Drill
0724-20 (SER A55A) Cordless 1/2" Hammer Drill
49-24-0185 (SER A61A) Cordless Worklight
0724-20 (SER A55B) Cordless 28V 1/2" Hammer-Drill
0724-20 (SER A55B) Cordless 28V 1/2" Hammer-Drill
0724-20 (SER A55B) Cordless 28V 1/2" Hammer-Drill
0627-24 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0627-24 (SER A79A) 18 Volt 1/2" Lok-Tor II Hammer Drill
0617-24 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0617-24 (SER A78B) 14.4 Volt 1/2" Lok-Tor II Hammer Drill
0625-24 (SER A77A) 18 Volt 1/2" Lok-Tor II Driver Drill
0615-24 (SER A76C) 14.4 Volt 1/2" Lok-Tor II Driver Drill
0612-50 (SER 311A) 14.4 Volt Compact Driver-Drill
0612-22 (SER 311A) 14.4 Volt 1/2" Compact Driver-Drill
0602-22 (SER 307A) 12 Volt 3/8" Compact Driver-Drill
0724-24 (SER A55A) Cordless 28V 1/2" Hammer-Drill
0724-24 (SER A55A) Cordless 28V 1/2" Hammer-Drill
0724-24 (SER A55A) Cordless 28V 1/2" Hammer-Drill
2650-20 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-21 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-22 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2601-22 (SER B28A) 1/2" Compact Driver Drill
2651-20 (SER B77A) 18 Volt 3/8" Square Impact Driver
2652-20 (SER B78A) 18 Volt 1/2" Square Impact Driver
2652-22 (SER B78A) 18 Volt 1/2" Square Impact Driver
5192 (SER 699D) D.I. Grinder
5192 (SER 699E) D.I. Grinder
5194 (SER 803E) D.I. Grinder
5194 (SER 803F) D.I. Grinder
2601-20 (B28B) 1/2" Compact Driver Drill
2601-20 (B28C) 1/2" Compact Driver Drill
2650-20 (B55B) 18 Volt 1/4" Hex Impact Driver
2651-20 (B77B) 18 Volt 3/8" Square Impact Driver
2652-20 (B78B) 18 Volt 1/2" Square Impact Driver
2601-20 (SER B28D) 1/2" Compact Driver Drill
2601-059 (SER D36A) 1/2" Compact Driver Drill
2601-059 (SER D36C) 1/2" Compact Driver Drill
2650-20 (B55C) 18 Volt 1/4" Hex Impact Driver
2606-20 (F24A) 1/2" Driver-Drill
2601-21 1/2" Compact Driver Drill
2602-22DC M18 1/2" Compact Hammer Drill
2602-22DC M18 1/2" Compact Hammer Drill
2606-22CT M18 1/2" Drill Driver
2607-20 M18 1/2" Hammer Driver
2607-20 M18 1/2" Hammer Driver
2607-22 M18 1/2" Hammer Driver
2607-22 M18 1/2" Hammer Driver
2607-22CT M18 1/2" Hammer Driver
2607-22CT M18 1/2" Hammer Driver
2704-20 M18 Fuel Hammer-Drill
2704-20 M18 Fuel Hammer-Drill
2650-20 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-21 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-22 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2601-22 (SER B28A) 1/2" Compact Driver Drill
2651-20 (SER B77A) 18 Volt 3/8" Square Impact Driver
2652-20 (SER B78A) 18 Volt 1/2" Square Impact Driver
2652-22 (SER B78A) 18 Volt 1/2" Square Impact Driver
5192 (SER 699D) D.I. Grinder
5192 (SER 699E) D.I. Grinder
5194 (SER 803E) D.I. Grinder
5194 (SER 803F) D.I. Grinder
2601-20 (B28B) 1/2" Compact Driver Drill
2601-20 (B28C) 1/2" Compact Driver Drill
2650-20 (B55B) 18 Volt 1/4" Hex Impact Driver
2651-20 (B77B) 18 Volt 3/8" Square Impact Driver
2652-20 (B78B) 18 Volt 1/2" Square Impact Driver
2601-20 (SER B28D) 1/2" Compact Driver Drill
2601-059 (SER D36A) 1/2" Compact Driver Drill
2601-059 (SER D36C) 1/2" Compact Driver Drill
2650-20 (B55C) 18 Volt 1/4" Hex Impact Driver
2606-20 (F24A) 1/2" Driver-Drill
2601-21 1/2" Compact Driver Drill
2602-22DC M18 1/2" Compact Hammer Drill
2602-22DC M18 1/2" Compact Hammer Drill
2606-22CT M18 1/2" Drill Driver
2607-20 M18 1/2" Hammer Driver
2607-20 M18 1/2" Hammer Driver
2607-22 M18 1/2" Hammer Driver
2607-22 M18 1/2" Hammer Driver
2607-22CT M18 1/2" Hammer Driver
2607-22CT M18 1/2" Hammer Driver
2704-20 M18 Fuel Hammer-Drill
2704-20 M18 Fuel Hammer-Drill
Products Compatibility
This item works with the following types of products:
- • Cordless Drill
- • Drill
- • Grinder
- • Hammer Drill
- • Impact Driver
- • Lighting
Questions & Answers for Pan Head Screw
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Impact Driver
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Soldering iron
Brushes where worn, would not turn motor
1. Removed case screws
2. Disassembled tool case
3. De solder brush pack
4 Re solder new brush pack
5. Re assemble case
6 Reinstall case screws
7. Check for proper function
2. Disassembled tool case
3. De solder brush pack
4 Re solder new brush pack
5. Re assemble case
6 Reinstall case screws
7. Check for proper function
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Cordless Drill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrench and hammer soldering gun
Chuck Assembly was wobbling, Brush Card Assembly was bad it was smoking, added bit holder and belt hook
Removed Chuck Assembly screw with screwdriver and put allen wrench in Chuck Assembly put drill in low gear smacked allen wrench with hammer Chuck Assembly came right off.
Removed back of drill for Brush Card Assembly then opened drill shell unsoldered two wires from trigger soldered in the two wires on the new Brush Card Assembly reassembled drill shell put new Chuck Assembly on in reverse order, added Belt Hook with one Pan Head Screw and bit holder with one Pan Head Screw.
Removed back of drill for Brush Card Assembly then opened drill shell unsoldered two wires from trigger soldered in the two wires on the new Brush Card Assembly reassembled drill shell put new Chuck Assembly on in reverse order, added Belt Hook with one Pan Head Screw and bit holder with one Pan Head Screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Cordless Drill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Wanted a bit holder and belt clip
I received a Milwaukee drill driver and impact driver as a gift. The drill driver did not come with a belt clip to attach to your belt nor a bit holder. I attached the belt clip and bit holder on to the drill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Hard to find metric screw
Screws arrived early and as described. Fits perfect. Would recommend.
Guest -
March 12, 2022
Verified Purchase
Worked as expected
Came on time. Was glad they were individually packed. Thanks will be ordering again.
Guest -
November 14, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
