Pan Head Screw 911113-1

Description:

This genuine Makita replacement part is designed for use with a variety of power tools. This screw is a standard hardware which has multiple applications based on your tool. It is made out of metal and it is sold individually. Would require a screwdriver to install or remove this screw.

Frequently Purchased With

Lever
$7.97

Hex Nut
$7.97

Flat Washer 10..
$5.19

Lever 105
$5.19

Compression Sp..
$5.19

Torsion Spring..
$5.19

Guard Shaft
$5.19

Switch Button..
$4.99

Compatibility

This part is compatible with the following machines:

Makita

9607B 7" Disc Grinder
LXSL01Z 18V LXT Lithium-Ion Cordless 7-1/2" Dual Slide Compound Miter Saw
LXSL01Z 18V LXT Lithium-Ion Cordless 7-1/2" Dual Slide Compound Miter Saw
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
2416S Chop Saw
2416S Chop Saw
2705X1 10" Contractor Table Saw with Stand
2705X1 10" Contractor Table Saw with Stand
UC120DWA 12v Cordless Chain Saw Kit
XHU02 18v Lxt Lithium-Ion Cordless 22-Inch Hedge Trimmer Tool Only
2030SZ Planer
2416S (Type 1) Saw
2416S (Type 2) Saw
9607GB Grinder
9607NB (Type 1) Grinder
9607NB (Type 2) Grinder
BLS712SFK Saw
BPT350 (Type 1) Misc
BPT350 (Type 2) Misc
BPT350 (Type 3) Misc
BPT350Z (Type 1) Misc
BPT350Z (Type 2) Misc
BPT350Z (Type 3) Misc
BST221F (Type 1) Misc
BST221F (Type 2) Misc
BST221X (Type 1) Misc
BST221X (Type 2) Misc
BST221Z (Type 1) Misc
BST221Z (Type 2) Misc
CA5000X Saw
GA7910 (Type 1) Sander
GA7910 (Type 2) Sander
GA7910 (Type 3) Sander
LS1013L (Type 1) Saw
LS1013L (Type 2) Saw
LS1013 (Type 1) Saw
LS1013 (Type 2) Saw
LS1013 (Type 3) Saw
LS1013 (Type 4) Saw
LS1016X (Type 1) Saw
LS1016X (Type 2) Saw
LS1040 (Type 1) Saw
LS1040 (Type 2) Saw
LS1040 (Type 3) Saw
LS1040 (Type 4) Saw
LS1040 (Type 5) Saw
LS1214F Saw
LS1214L (Type 1) Saw
LS1214L (Type 2) Saw
LS1214LX1 (Type 1) Saw
LS1214LX1 (Type 2) Saw
LS1214 (Type 1) Saw
LS1214 (Type 2) Saw
LS1216 (Type 1) Saw
LS1216 (Type 2) Saw
LS1216 (Type 3) Saw
LS1216 (Type 4) Saw
LS711DWBEK (Type 1) Saw
LS711DWBEK (Type 2) Saw
LS711DWB (Type 1) Saw
LS711DWB (Type 2) Saw
LS711DZ (Type 1) Saw
LS711DZ (Type 2) Saw
LXHU02Z (Type 1) Grass Trimmer
LXHU02Z (Type 2) Grass Trimmer
LXSL01Z1 (Type 1) Saw
LXSL01Z1 (Type 2) Saw
LXSL01Z (Type 1) Saw
LXSL01Z (Type 2) Saw
LXTP01 (Type 1) Saw
LXTP01 (Type 2) Saw
LXTP01Z1 (Type 1) Saw

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Chain Saw
• Chop Saw
• Circular Saw
• Drill
• Grinder
• Impact Driver
• Jig saw
• Jointer
• Miter Saw
• Nailer
• Planer
• Pole Saw
• Sander
• Saw
• Table Saw

Expand List

Repair Instructions: Submitted by Customers Like You

Tool Type:

Chop Saw

Parts Used:

Compression Spring 3 - 231457-6

Pan Head Screw - 911113-1

Flat Washer 10 - 253024-7

Hex. Bolt M10x90 - 251668-7

Lever - 416006-2

Hex Nut - 252144-4

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, None

Nothing

Went well. Easy

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chop Saw

Parts Used:

Pan Head Screw - 911113-1

Lever - 416006-2

Hex Nut - 252144-4

Compression Spring 5 - 231266-3

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Nutdriver

Locking handle for the miter arm broke

Replaced the broken handle and installed new collar and spring. Thanks for your quick response to my order.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Miter Saw

Parts Used:

Pan Head Screw - 911113-1

Felt Ring 25 - 262077-5

Miter Scale Plate - 816920-6

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

Worn parts.

Removed the old and replaced with the new.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Miter Saw

Parts Used:

Switch Button - 411478-6

Pan Head Screw - 911113-1

Carbon Brush Set - CB154

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Brushes worn, missing parts

Remove the brush caps with a small screwdriver, then removed the old brushes, then I installed the new brush set. I then was able to just push the new switch button in the housing. I then was able to finally use pointer again by screwing it in. Thank you.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

4

4 stars

1

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Parts worked perfectly!

The replacement handle and screw worked perfectly.

Guest - 24 days ago Verified Purchase

Saw repairs

U had all the parts I need for 8,9 year old saw repair,I followed the tracking report after u said it has shipped, but didn’t get any other report then the first one, and the next thing u know it was here. U guys don’t mess around. Thanks

Guest - June 4, 2022 Verified Purchase

screw returning saw to perfect operating condition. Received parts quickly, easy fix.

Tipped over my saw on stand resulting in broke handle used to adjust blade tilt. Ordered new handle along with attachment screw returning saw to perfect operating condition. Received parts quickly, easy fix.

Guest - November 18, 2019 Verified Purchase

easy peasy

Perfect couldn’t find it anywhere else!

Guest - September 25, 2019 Verified Purchase

A good experience fixing my Makita chop saw

I've used eReplacement Parts many times and note the following: A, All the parts I've ordered seem to be OEM and always a perfect fit. B, Picking and ordering parts is HIGHLY EFFICIENT. Click on the number and get an immediate image of the part (similar to RockAuto). C, Cart review is clear, concise and allows for intuitive and simple manipulation of your order. D, Not fond of their shipping rates, but is what it is. Interestingly, a friend has a different model Makita saw and was unable to get the parts he needed from another on-line parts supplier, "back ordered with an anticipated arrival two months out." He ended up buying another saw, which isn't (heh) so bad either, but I think he could have gotten the parts here because eReplacement Parts actually STOCKS the part, they're not a pass-through and take our buck operation. Generally just a good company to do business with. OKAY, HERE'S MY COMPLAINT: Their parts graphic pages lose resolution when you zoom in--this is a big deal because (are you listening e?) because I use those graphics to put my saws back together when the parts come a week later. Would be ESPECIALLY nice on my cell phone. Nuff said.

Guest - November 20, 2021 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Pan Head Screw