Product Information
Description:
This genuine item is supplied directly from the original equipment manufacturer for use with Delta scroll saws. It is one of the special pads that secure cams on the equipment. This is an identical replacement for a damaged or a missing hardware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct application. One durable pad is made of durable metal and is sold individually. A wrench will be needed to perform this repair. |
Compatibility
the 24 compatible machines
This part is compatible with the following machines:
Delta
SM600 Type 1 Scroll Saw
SM600 Type 1 Scroll Saw
SS250 Type 1 Scroll Saw
SS250 Type 1 Scroll Saw
SS350LS Type 1 Bench Scroll Saw
SS350LS Type 1 Bench Scroll Saw
40-680 Type 1 Industrial Scroll Saw
40-680 Type 1 Industrial Scroll Saw
SS350 Type 1 Scroll Saw
SS350 Type 1 Scroll Saw
40-650 Type 2 Scroll Saw
40-650 Type 2 Scroll Saw
SM600 Type 1 Scroll Saw
SS250 Type 1 Scroll Saw
SS250 Type 1 Scroll Saw
SS350LS Type 1 Bench Scroll Saw
SS350LS Type 1 Bench Scroll Saw
40-680 Type 1 Industrial Scroll Saw
40-680 Type 1 Industrial Scroll Saw
SS350 Type 1 Scroll Saw
SS350 Type 1 Scroll Saw
40-650 Type 2 Scroll Saw
40-650 Type 2 Scroll Saw
40-650 Type 1 Scroll Saw
40-650 Type 1 Scroll Saw
40-640 Type 2 20" Scroll Saw
40-640 Type 2 20" Scroll Saw
40-570 Type 1 Scroll Saw
40-570 Type 1 Scroll Saw
40-560 Type 2 16" Scroll Saw
40-560 Type 2 16" Scroll Saw
40-540 Type 2 Scroll Saw
40-540 Type 2 Scroll Saw
40-540 Type 1 Scroll Saw
40-540 Type 1 Scroll Saw
40-650 Type 1 Scroll Saw
40-640 Type 2 20" Scroll Saw
40-640 Type 2 20" Scroll Saw
40-570 Type 1 Scroll Saw
40-570 Type 1 Scroll Saw
40-560 Type 2 16" Scroll Saw
40-560 Type 2 16" Scroll Saw
40-540 Type 2 Scroll Saw
40-540 Type 2 Scroll Saw
40-540 Type 1 Scroll Saw
40-540 Type 1 Scroll Saw
Products Compatibility
This item works with the following types of products:
- • Saw
- • Scroll Saw
Questions & Answers for Pad
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Scroll Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Punch
Scroll Saw would not hold the blade in place
Drove the pin out of the old pad. Reassembled the new parts. Installed the blade
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scroll Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
The blades were coming lose. I use the saw a lot and the just were worn out.
Removed the old one and put the new ones back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scroll Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Just a hammer to take out the pin that mounts it on saw
the screw was bent and stopped the blade from getting tight,so i did not need the parts that i bought so i have spare parts. i just replaced the screw.
1: I removed the whole assembly by tapping out the in
2: Then i took apart the clamp and i saw the screw was bent so i replaced the screw with one that was threading into the nut and put it back together .
3: After i held the blade assembly in line with the hole and put the pin back in by tapping it in.
2: Then i took apart the clamp and i saw the screw was bent so i replaced the screw with one that was threading into the nut and put it back together .
3: After i held the blade assembly in line with the hole and put the pin back in by tapping it in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Scroll Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Blade clamp would release by itself.
I replaced the worn parts by disassembling the clamp and re-assembling the clamp with the new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information