This is a genuine OEM sourced replacement part designed for nailers/staplers. This gasket provides an air-tight seal for the end cap. Over time this gasket will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of composite material and it is sold individually.
Replacing this item you would need a hex key/allen wrench.
Packing P0590000400
OEM part for: Bostitch, Porter Cable
Part Number: P0590000400
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 16 machines
Bostitch
Porter Cable
This item works with the following types of products:
- Stapler Parts
- Nailer Parts
This part replaces obsolete part #: JA1151C1
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Packing
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Nailer Head Valve Body broke
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, allen wrench
Parts Used
replacement of gasket
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, painters tool
Parts Used
Broken end cap
Tool Type
Nailer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Stapler would not fire
Tool Type
Stapler
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Allen Wrench
2. Located broken head valve
3. Removed broken head valve
4. Cleaned and lubricated internal cylinder wall
5. Installed new o-rings onto new head valve and applied lube
6. Reassembled head valve into cylinder
7. Installed new top packing (gasket)
8. Installed end cover and tightened screws.
9. Attached air hose and test fired the stapler.
Nailer failed to fire when trigger was pulled.
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
2. Remove worn or damaged head value.
3. Replace old head value with new head value along with new O-rings just to be sure.
4. Remove old packing gasket and install new packing.
5. Place head cap on new packing gasket and re-install four allen screws.
6. Test fire and nailer now works like new.
Leaking air. Valve piston had piece broken off
Tool Type
Nailer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Allen wrench
Top cap cracked
Tool Type
Stapler
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench
Parts Used
Bad o-rings
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Adjustable Wrench
Wouldn't shoot staples
Tool Type
Stapler
Difficulty
Easy
Time
15-30 minutes
Tools Used
Adjustable Wrench, Allen wrench, scraper
Driver broke at the end
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Wrench Set, Allen wrench
Parts Used
Remove the old gasket and clean the area
Remove the old driver and insert the new one
Oiled the inner parts
Place the gasket on the housing
Screw the cap back on
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.