Product Information
Description:
| This is sold as a set of two o-rings. The o-rings attach to the body and base with spray. These items are OEM parts sourced directly from the manufacturer for use in kitchen faucets made by Delta Faucet. A screwdriver may be needed to help replace these parts. They are made of rubber and will need to be replaced if they break. |
Frequently Purchased With
Compatibility
Products Compatibility
This item works with the following types of products:
- • Faucet
Questions & Answers for O-ring
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Faucet
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, knife
Kitchen faucet neck would "launch" when water turned on
Removed faucet neck.
Removed worn plastic retainer and worn O-rings.
Snapped faucet neck in place.
Toughest part of job was identifying the 10 year-old faucet make and model. A patent number stamped on the neck revealed it was a Delta faucet. ereplacementparts.com had exploded-view schematics of various Delta faucets, and only one depicted the worn plastic retainer. The o-rings were also ordered as a precaution.
Removed worn plastic retainer and worn O-rings.
Snapped faucet neck in place.
Toughest part of job was identifying the 10 year-old faucet make and model. A patent number stamped on the neck revealed it was a Delta faucet. ereplacementparts.com had exploded-view schematics of various Delta faucets, and only one depicted the worn plastic retainer. The o-rings were also ordered as a precaution.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Faucet
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, O-ring pick
Faucet leaking a base of spout
Remove locking ring at base of spout
Pull spout up and off of base
Remove old o-rings
Install new o-rings
Replace spout and locking ring
Pull spout up and off of base
Remove old o-rings
Install new o-rings
Replace spout and locking ring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Faucet
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, No tools used
Faucet spout bar leaking
Removed the faucet spout by pulling upward, removed the retainer and 2 O-rings. Replaced by pushing faucet spout back all the way down over retainer and O- rings to base of escutcheon.
Tested with no leaks. Thank you.
Tested with no leaks. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
faucet delta
replace seals
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Maybe screwdriver to pull o rings off. Plumbers grease on o
Leak at base of spout
1. Slide spout collar up on spout
2.remove spout retainer
3.remove old o rings with flat screwdriver
4. Replace new o rings
5.apply plumbers grease to o rings
6.replace spout and retainer
7. Back collar back down around spout base
2.remove spout retainer
3.remove old o rings with flat screwdriver
4. Replace new o rings
5.apply plumbers grease to o rings
6.replace spout and retainer
7. Back collar back down around spout base
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Faucet was leaking at the base
Followed the instructions video from you tube,,, it was very easy ,, I used a small screwdriver to take off the worn o rings,, and put on the new o rings
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Cleaning cloth & string
Water leaking around base of faucet and ruining our wooden backsplash.
In my case the retaining clip was not broken but the o rings/seal leaked. I bought another retaining clip with the o ring set because I figured I'd break the old 20 year old clip. But to my surprise I didn't. To make a short story of it, what took the most time was cleaning everything before reassembling which I highly recommend. We have hard water and high magnesium ppm so this is what took the extra time. Be careful, make sure surfaces are clean and do not use anything sharp when trying to seat the o rings. It's very tempting to use a knife from the kitchen drawer. Use a piece of string and loop it around the o ring then pull string when trying to get them past the larger areas. Especially the bottom o ring. That's a learned trick, they don't teach u that in school.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Water leaking bottom of faucet
Snapped o-ring off, slide new o-ring on no more leaks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Faucet
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Knife to extract old O-ring
Old O-ring was compressed and leaking.
Two top-of-faucet O-rings which allow goose neck to rotate over sink.
Take off complement off bottom of goose neck.
Take off plastic retainer which holds goose neck to entry pipe.
With sharp object, take out old O-rings.
Clean O-ring grooves and rotate new O-rings into place.
Reassemble.
Take off complement off bottom of goose neck.
Take off plastic retainer which holds goose neck to entry pipe.
With sharp object, take out old O-rings.
Clean O-ring grooves and rotate new O-rings into place.
Reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
3 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Expectations satifactory!
Parts arrive faster than I thought possible. Sink is functioning again. Thank you!
Guest -
June 1, 2020
Verified Purchase
Perfect for the job
eReplacement Parts is a great resource! Instead of having to buy a new kitchen faucet because of leaking and inability to find the right sized o-rings, we got off with an easy and inexpensive repair with these o-rings. It's good to be able to find original parts, and this is the place for them.
Kathryn -
March 31, 2020
Verified Purchase
Should be easy
It can be hard to review if it has not been delivered. It is two
O-rings. What gives. The date today is 6-19-2019 . It
Was ordered 5-29-2019
Guest -
June 19, 2019
Verified Purchase
eReplacementParts Team
Hi John,
Thank you for your review. Please accept our apologies that you have not received your order. We have contacted you privately regarding this situation.
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
