eReplacementParts.com
877-346-4814
DeLonghi Parts
Repair Parts Home  Appliance Parts  DeLonghi Parts  5313217701 O-Ring

O-Ring

Part Number: 5313217701
DeLonghi
Availability: Special Order [ more info ]
Price: $3.06
Leaves our warehouse within
12 - 18 business days.

*This part replaces obsolete part #: 5332199800, 5332154700 and 536369.

Product Information
Manufacturer: DeLonghi
Product Number: 5313217701
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Specifications
  • OD 5/16 Inch
  • ID 3/16 Inch
Description:
Genuine Delonghi replacement part, this item is sold individually.
This O-Ring is used as a seal to keep liquid from leaking between two connected parts.
Because of the heat that this part comes in contact with it does wear out often.
It is advised to have an extra one or two on hand.
Products Compatibility

This item works with the following types of products:

  • • Coffee Maker
  • • Espresso
Questions & Answers

Looking to replace o-rings or anything else that will improve situation of milk foaming not working reliably. Machine not able to pull milk from milk carafe and not able to do proper foam (often just condensed water is coming out instead of milk). With varied success I have been able to repair this problem over several years, by replacing three o-rings in place where the milk carafe inserts into DeLonghi Rialto (Magnifica) body, but problem keeps coming back. I always used just generic o-rings. How best address this issue? many thanks
Pete for model number DeLonghi Rialto Esam 4500
Hello Pete and thank you for writing. With this particular model, it seems to be a problem with the o rings getting damaged and seem to have to be replaced very often. There are six rings that you should check for damage and replace if needed. part # 535692 part # 533135 part # 5332177500 part # 5332196000 part # 5313217751 part # 5313217701 You should also check the tank milk assembly # 5513211611 for damage. We hope this helps. Please contact us anytime if you require further assistance.
does this o ring go where the milk frother attaches to the to the coffee machine
matthew for model number EC 860
Hello Matthew, thank you for your inquiry. O-ring 5313217701 goes to the generator and attaches between the tubes. I hope this information helps!
Looking for orings for steam control valve. Leaks when brewing.
Joel for model number Esam4400
Hello Joel and thanks for writing. O ring Part Number: 5313217751 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Repair Instructions: Submitted by Customers Like You
7 of 8 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Water was leaking from a variety of connection points within my DeLonghi Magnifica Super Automatic Espresso machine
Remove sides, back, top and front control panel following video on eReplacementparts.com web site. Remove clips where tubes connect to generator and other interior machine parts, remove tube, remove old o-ring, replace with new o-ring, replace clips. Reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Leaking water from the heating element connection to water pump when machine is brewing
I unplugged the machine and removed the water tank and water tank cover. Then, I unscrewed the two screws on top of the machine holding the main covers in place, and carefully pried the steam knob off. After that, taking the cover off the unit is a little tricky. There's a tab in the back that locks it into place and takes some finesse to not break while trying to take the cover off.

Once it's off however, I located the tube running from the water pump to the heating element, removed the alligator clip holding it in place, and carefully pulled the tube free from the connector. I had to fish the o ring out from the connector with a toothpick, but it was relatively easy. I then slipped the new o ring over the tube, re-inserted the tube very firmly into the connector, locked it in place with the alligator clip, and tested the machine for leaks. Once confident that the leaks were solved, I replaced the cover, steam knob, etc and screwed everything back into place.

Overall a very simple repair, just take your time and make sure to use common sense.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Connection - 5332212900
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, small pick for O-ring removal
leaks
1. Removed water tank & used coffee catcher and tray.
2. Removed sides, back, and top panel.
3. Carefully make relief in wires, and water tubes
4. Remove 4 mounting screws and the generator assembly
5. Remove water connection to generator.
6. Remove and replace connector tail piece.
7. Reverse steps 5 through 1 in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Knob - 5513271099
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, specialty screw driver
Leaking
I disassembled the unit to access the leaking tube. I have several of these machines so I was familiar with diagnosing and repairing the problem. The manufacturer has changed the screws to discourage DIY repairs so a bit of determination was needed. That is where the majority of the time was spent. I replaced those factory screws with x/ sheet metal screws. The old O-ring was accessed by removing a retaining pin. The new O-ring was installed and the unit was reassembled. The steam / coffee know is s simple pull of the old and push on the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Leaking water
I removed the top of coffee maker. Turn coffee pot on temporarily ( careful not to touch wires). Water was dripping out of one oil ring. I replaced both of them. Coffee pot works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
O-Ring D4,5 - 5313217691
Tube Fep D12-De4 L= 230 2Bushes - 5513216561
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, pick or small hook
Coffee express start leak water
1.remove panels from coffee express using screwdriver.
2.using pick or small hook remove small spring washers from tube .
3.wiggle tube out from holders remove old rubber o-rings with pick or hook
4.install new o-rings on fed tub and reinstall new tub in holders reinstall spring washers on tube
5.reinstall all panels from coffee express .enjoy coffee .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Connection - 5332212900
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, None
Espresso machine leaking
Identified section leaking
Tried several combinations of gaskets and O rings and finally stopped the leak
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Water leaks around the boiler
Remove screws on the back of the espresso machine
Remove the rear cover panel
Slide the side cover panels to remove
Remove screws and the top cover
Remove the tube ends and replace each washer, refer to the part drawing from the website
Put the top over back and test for any leaking
Put the side and then rear panels back

Done

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Valve Ring - 621986
Valve Spring - 6113211931
Valve - 7313286129
Gasket - 7313285849
O-Ring - 5313217701
Valve - 5332148400
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Star screw driver set -
Pump failed
The hardest part was reaching three screws which secure the top of the machine. It requires a star drive. All of the other screws are small Phillips heads. After you remove those and two on the back, the top will lift right off.

I promise, everything is very intuitive. Unplug the hoses by simply pulling on them, remove the pump by wiggling it off its rubber mounts and unscrew the water valve connected to the pump the pump. Replace those with the new ones and reverse the process.

I chose to change a few of the other little pieces of tubing, simply because I was under the covers - super simple and cheap.

I also replaced the spring and valve on the head (where the water comes out) to ensure that the new pump didn't overwhelm an old valve.

This pump works perfectly in our Delonghi EC702, it actually is an improvement over the original one. With these parts changed, we have a completely new machine!

Thanks eReplacement for the super fast service and clear parts catalog!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Spring - 6132101300
Generator Gasket - 5332149100
O-Ring - 5313217751
O-Ring - 5313217701
Tube Ptfe Di2-De4 L=270 2Bushes - 5513212881
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Take pictures at each stage of disassembly
Leaking water during expresso making rreplaced 1 tube and several Orings, required silacone lube for rings
1 Removed back and L side of coffee maker, Removed coffee press capsule via port behind water reservoir. Lift top off
2 Remove 4 screws holding press capsule together, take pix so levers on bottom can be put in exactly same position. Then remove piston, the remove O-rings, clean grooves thoroughly, grease new rings, and replace them
3 Remove center phillips screw on screen on piston top, clean thoroughly w soap/water and replace
3A. Reassemble piston into press capsule, take care to insert the spring under the top level lever, and refer to your picture to reassemble to press capsule.
4. Examine tube location, remove and replace. DO not disassemble steam generator unless A. there is evidence of leakage or your unit is not producing adequate steam on steam setting.
5. Re-assemble tops side and back.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Completely satisfied
    Work as expected, arrived quickly in Canada
    iGlobal - February 25, 2020 Verified Purchase
    Easy Repair
    After taking off the top, the tube was easy to access. Just remove the spring clip, pull out the tube end, fish out the old o-ring with a toothpick or other tool, then put the new O-Ring on the end of the tube and insert. Replace the spring clip and top and you are good to go.
    Guest - October 31, 2019 Verified Purchase
    It is the right part. No more water leaks.
    It arrived very quickly, no more water drip, thank you for your help ereplacementparts!!
    Nicholas - September 22, 2019 Verified Purchase
    Wrong parts
    It was not the right parts showing on your drawing I guess you guys assumed that what’s ever is in the other part of tube will be the same on the orther end, when I open my coffee maker it’s was different, I’m not sure if you guys have it because it’s not on the drawing that’s you guys providing
    Guest - December 30, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeLonghi
    Product Number: 5313217701
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy