866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Appliance Parts  DeLonghi Parts  5313217701 O-Ring

O-Ring

Part Number: 5313217701
DeLonghi
Availability: 25 in stock
Price: $3.00
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 5332199800, 5332154700 and 536369.

Specifications
  • OD 5/16 Inch
  • ID 3/16 Inch
Description:
Genuine Delonghi replacement part, this item is sold individually.
This O-Ring is used as a seal to keep liquid from leaking between two connected parts.
Because of the heat that this part comes in contact with it does wear out often.
It is advised to have an extra one or two on hand.
Product Information
Manufacturer: DeLonghi
Product Number: 5313217701
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
O-Ring
O-Ring
$2.99
Products Compatibility

This item works with the following types of products:

  • • Coffee Maker
  • • Espresso
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
7 of 8 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Water was leaking from a variety of connection points within my DeLonghi Magnifica Super Automatic Espresso machine
Remove sides, back, top and front control panel following video on eReplacementparts.com web site. Remove clips where tubes connect to generator and other interior machine parts, remove tube, remove old o-ring, replace with new o-ring, replace clips. Reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Leaking water from the heating element connection to water pump when machine is brewing
I unplugged the machine and removed the water tank and water tank cover. Then, I unscrewed the two screws on top of the machine holding the main covers in place, and carefully pried the steam knob off. After that, taking the cover off the unit is a little tricky. There's a tab in the back that locks it into place and takes some finesse to not break while trying to take the cover off.

Once it's off however, I located the tube running from the water pump to the heating element, removed the alligator clip holding it in place, and carefully pulled the tube free from the connector. I had to fish the o ring out from the connector with a toothpick, but it was relatively easy. I then slipped the new o ring over the tube, re-inserted the tube very firmly into the connector, locked it in place with the alligator clip, and tested the machine for leaks. Once confident that the leaks were solved, I replaced the cover, steam knob, etc and screwed everything back into place.

Overall a very simple repair, just take your time and make sure to use common sense.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Water leaks around the boiler
Remove screws on the back of the espresso machine
Remove the rear cover panel
Slide the side cover panels to remove
Remove screws and the top cover
Remove the tube ends and replace each washer, refer to the part drawing from the website
Put the top over back and test for any leaking
Put the side and then rear panels back

Done

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Valve Ring - 621986
Valve Spring - 6113211931
Valve - 7313286129
Gasket - 7313285849
O-Ring - 5313217701
Valve - 5332148400
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Star screw driver set -
Pump failed
The hardest part was reaching three screws which secure the top of the machine. It requires a star drive. All of the other screws are small Phillips heads. After you remove those and two on the back, the top will lift right off.

I promise, everything is very intuitive. Unplug the hoses by simply pulling on them, remove the pump by wiggling it off its rubber mounts and unscrew the water valve connected to the pump the pump. Replace those with the new ones and reverse the process.

I chose to change a few of the other little pieces of tubing, simply because I was under the covers - super simple and cheap.

I also replaced the spring and valve on the head (where the water comes out) to ensure that the new pump didn't overwhelm an old valve.

This pump works perfectly in our Delonghi EC702, it actually is an improvement over the original one. With these parts changed, we have a completely new machine!

Thanks eReplacement for the super fast service and clear parts catalog!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Spring - 6132101300
Generator Gasket - 5332149100
O-Ring - 5313217751
O-Ring - 5313217701
Tube Ptfe Di2-De4 L=270 2Bushes - 5513212881
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Take pictures at each stage of disassembly
Leaking water during expresso making rreplaced 1 tube and several Orings, required silacone lube for rings
1 Removed back and L side of coffee maker, Removed coffee press capsule via port behind water reservoir. Lift top off
2 Remove 4 screws holding press capsule together, take pix so levers on bottom can be put in exactly same position. Then remove piston, the remove O-rings, clean grooves thoroughly, grease new rings, and replace them
3 Remove center phillips screw on screen on piston top, clean thoroughly w soap/water and replace
3A. Reassemble piston into press capsule, take care to insert the spring under the top level lever, and refer to your picture to reassemble to press capsule.
4. Examine tube location, remove and replace. DO not disassemble steam generator unless A. there is evidence of leakage or your unit is not producing adequate steam on steam setting.
5. Re-assemble tops side and back.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Valve - 7313286129
O-Ring - 5313217701
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Valve broke and water did not come out where it should, but rather poured out the bottom of the machine
1. Removed cover with 4 screws.
2. Removed the old valve and the hose. (We needed to use a flat blade screw driver to loosen the hose.)
3. Installed the new valve and the hose.
4. Closed the cover.
5. Ready to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
O-Ring - 5313217761
Tube (15 Cm Long) Magnifica - 5513213501
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Steam leak from top of machine under cup warming rack
Remove the screws from outside and take of back panel
Remove screws at top of each side panel and remove sides
Remove top cover to expose the generator under the cup warming rack
Remove the retaining clips on the top tube and remove tube and o-rings
Replace tube and o-rings with new and reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Pump 220 Volt - 5113211281
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Bad pump and leaking
Disassembled replaced o ring in boiler and removed/replaced water pump
Reassemble
Works like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217701
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Leaking.
Took the top off. Removed the clip. Dislodged the hose. Needle nose to pull out the old o-ring that was left in connection. Put on the new one. Put the tube back. Clipped. Done.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Froth Dispenser - 7313285859
Diffuser - 6032101200
O-Ring - 5313217701
Tube - 5532111800
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Hook and pick tool to remove O Ring
Water leak
Removed tube retaining clips with pliers, carefully used a hook and pick tool to remove ORing from inside connection to boiler. Lubricated new ORing with small amount of Vaseline to slide deep into connection to boiler. Replaced tube and retaining clips.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for O-Ring - ( 5313217701 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Water Leaks

zumaster

I think I need this tube but there 2 o-rings on the bushings, which o-rings are these and do they come with this tube assembly?
WJA
Hello zumaster,

The o-rings you are looking for are part number 5313217701. The 5513212881 tube does not include these.

Hope this helps,
-WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy