866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Appliance Parts  DeLonghi Parts  5313217751 O-Ring

O-Ring

Part Number: 5313217751
DeLonghi
Availability: 25+ in stock
Price: $2.99
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 5332149000 and 5332177600.

Description:
This is a genuine Delonghi replacement part, It is sold individually.
This O-Ring is used in a number of Delonghi products.
Its purpose is to create a seal to keep fluids from leaking from the appliance.
Product Information
Manufacturer: DeLonghi
Product Number: 5313217751
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Products Compatibility

This item works with the following types of products:

  • • Coffee Maker
  • • Espresso
Repair Instructions: Submitted by Customers Like You
18 of 19 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Milk was not frothing when steam nozzle was used
When using steam nozzle, steam appeared to be coming out of nozzle but milk was not frothing. Further investigation revealed that steam appeared to be leaking from top of removable nozzle. Looked at parts diagram on replacementparts website and realized that o'ring was missing (unsure of how it became dislodged and where it was). No tools needed to connect new o'ring and steam is working correctly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Hot Water Outlet - 5332177500
Hot Water Outlet O Ring Small Green - - 5332196000
O-Ring - 5313217751
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Would not steam milk
Replace O-rings one at a time using tooth pick. Did not work.
Removed back, sides, and front control panel using Philips screwdriver, removed Hot Water Outlet assembly ( one screw) removed retainer clip with needle nose pliers and removed steam line. Inserted steam line into new part and secured with retaining clip. Screwed back on parts.
Milk steamer works like new!
Spent $9.00 on O-rings( green, red, black) and $6.11 on Hot Water Outlet assembly which includes the three O-rings. Buy the assembly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None, just fingers
I lost the o-ring from the steam spout on my espresso maker
These guys had the right o-ring and it slipped right on to the spout and I now have steamed milk again for my morning latte !!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Delonghi Magnifica leaked.
Could find nothing wrong but it still leaked after replacing o-rings. Finally determined that calcification on the condensate drain was allowing water to flow up the side then back down to the counter top. I cleaned it w vinegar, a toothbrush and dental floss. Not a drop on the counter now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Hot Water Outlet - 5332177500
Hot Water Outlet O Ring Small Green - - 5332196000
O-Ring - 5313217751
Milk Tank Assembly - 5513294531
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Not producing any frothed milk
Removed old o-rings with fingernails and replaced. It is not clear that the o-rings needed replacing or just the milk jug, but the o-rings alone did not fix the problem. Works like new now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Spring - 6132101300
Generator Gasket - 5332149100
O-Ring - 5313217751
O-Ring - 5313217701
Tube Ptfe Di2-De4 L=270 2Bushes - 5513212881
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Take pictures at each stage of disassembly
Leaking water during expresso making rreplaced 1 tube and several Orings, required silacone lube for rings
1 Removed back and L side of coffee maker, Removed coffee press capsule via port behind water reservoir. Lift top off
2 Remove 4 screws holding press capsule together, take pix so levers on bottom can be put in exactly same position. Then remove piston, the remove O-rings, clean grooves thoroughly, grease new rings, and replace them
3 Remove center phillips screw on screen on piston top, clean thoroughly w soap/water and replace
3A. Reassemble piston into press capsule, take care to insert the spring under the top level lever, and refer to your picture to reassemble to press capsule.
4. Examine tube location, remove and replace. DO not disassemble steam generator unless A. there is evidence of leakage or your unit is not producing adequate steam on steam setting.
5. Re-assemble tops side and back.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Lack of milk flow
Easy to slip on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
O-rings need d replacing
Removed old o-rings and replaced with new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Just used fingers
Have delonghi Express maker. One of the I rings in frother was missing replaced it and now works fine
Replaced o ring on the frother
Pulled off the frother parts. Replaced o ring and snapped parts back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
O-Ring - 5313217751
Removable Steam Nozzle - 5332169300
Removable Milk Frother Body - 5513270219
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
My milk frother wasn't working, just sputtering
The milk frother was cracked so it wasn't making a tight seal. Also, the gasket had come off but I didn't know that. So I replaced with the new nozzle, then it still didn't work. When I looked down on the floor, my cat was playing with a little rubber ring. The gasket! I put it on (after washing it) and works great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for O-Ring - ( 5313217751 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: O-Ring

1586178

Never saw an answer to these questions: Is this a high temp O-Ring? Does it replace the orange one that is at the top of the generator under the white tube?
Thank you for your question!

This o-ring is high temp. As far as replacing the orange o-ring you're talking about you can cross reference with this diagram here:http://www.ereplacementparts.com/delonghi-esam5400-coffee-maker-parts-c-122345_122351_122772.html

The figure number for this o-ring on the above listed diagram is 44.

Good luck!

-Halifax
FWIW, the o-ring that fits under the white tube on top of the generator is http://www.ereplacementparts.com/oring-p-1071061.html. The one I replaced is orange, the new one is black.
Question: O-ring

1221430

Is this o-ring the one that goes over the tubing for the generator and is it high temp, since the one I took out was orange in color?
Question: O Ring

rhpink

how do you replace o ring
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Replaced lost o ring
    yay! This was a great replacement for the lost o ring on my Delonghi Magnifica latte wand!
    Guest - 12 days ago Verified Purchase
    Solved the problem
    So glad I was able to find the part- fits perfect!
    Guest - 27 days ago Verified Purchase
    Espresso Machine Maintenance
    I have had a couple of DeLonghi Espresso machines for 10+ years. The o-rings for the steamer function require replacement occasionally. I get these from eReplacementParts rapidly and at a good price.
    Guest - April 30, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy