O-ring A082777

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Throttle valve cracked from age

Removed the throttle valve plug
Remove the old o-ring, spring and throttle valve
Installed the new throttle valve, spring and o-ring on the throttle valve plug and tightened it

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Adjustable Wrench

Bought as junk, tore it apart and went online to see what was missing. Worked when reassembled.

Cleaned the tool inside and out
Remove the throttle valve plug
Installed the throttle valve
Installed the spring
Put the o-ring on the valve plug
Dropped some air tool in it, hooked it up to the air hose, It ran like a new tool

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Air Ratchet would not work, It had not been used in quite a while.

Replaced the Throttle Value and "O" Ring. The old ones had gotten Hard and cracked. It now works great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

The valve throttle in my 3/8 inch air ratchet wrench disintegrated after sitting for an extensive period of time.

Removed plug with the screwdriver. Replaced valve-throttle, O-ring, and plug. Lubricated the wrench with air tool lubricant. Worked perfectly. Straight forward repair using the diagram on the website. No issues.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Air tool trigger would not turn off or control tool.

Replaced plug throttle valve only a couple parts in there. It is a 20 year old CP air ratchet I was surprised you had parts for it. Easy cheep fix. I will always check eReplacementParts first.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Unit wouldn't shut off

Unscrewed plug, removed spring, replaced sealing plug, re-assembled.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

No power and air leakage in air ratched wrench

1. Removed black plastic screw cap from body of wrench.
2. Removed old spring and plastic valve.
3. Cleaned valve seat.
4. Removed o-ring from plastic screw and replaced with new o-ring.
5. Put new valve, spring and cap screw in body
6. Test to confirm.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver

air would pass trigger.

1. unscrew cap.
2. pull spring and debris.
3. clean area with denatured alcohol.
4. blow down with compressed air.
5. add new throttle valve to spring, with plumbers grease.
6. add o ring to outer housing, with plumbers grease.
7. screw down housing to snug, you are ready to play.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

The trigger spring and valve were broke.

Took the old spring and valve body out and replaced it with new and a new "O" ring also.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used: