Easy
30-60 minutes
This is an authentic OEM product from Kawasaki which is designed for use with engines commonly installed on lawn and garden equipment. It provides an air-tight seal for the oil filler. Over time the material may wear out and begin to crack eventually requiring a replacement. This item is sold individually and is made of durable rubber. Check the diagrams of your model for the correct installation of this O-ring. Note, you will need a properly sized or an adjustable wrench to remove and resecure the bolt that holds the filler tube in order to perform this repair.
O-ring 670D2016
OEM part for: Kawasaki
Part Number: 670D2016
$4.99
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This O-ring will fit the following 5406 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Kawasaki
Show More Compatible ModelsThis item works with the following types of products:
- Engine Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great part
They came in when they said it would, and they all fit like they were like new parts
Guest -
March 19, 2023
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for O-ring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Oil leak at rear of engine.
Daniel - March 23, 2016
👍 5 of 7 people found this instruction helpful
Tool Type
Engine
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Hard part was determining where the the leak was as it was not very apparent. Power washed motor, then ran it under load for 10 minutes ,shut it off and checked with a paper towel for any signs of oil. Found oil where the oil filler /Dip stick tube goes into engine. removed the tube (fasten on by a bolt on top) pulled tube and noticed the O ring was flattened. Ordered one from E-Replacement parts. easy 5-minute repair once the source was found.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil plug was leaking
paul - May 28, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Engine
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Removed the old oil plug and joint from the engine and replaced the with the new ones. No more leaking.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine oil leaking
Greg - January 24, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Adjustable Wrench
Parts Used
- Seal-oil,vc6x10x2.5 - 92049-2097
- Gasket - 11009-2024
- Gasket - 11009-2025
- Gasket-oil Gauge - 11009-2346
- O-ring - 670D2016
- Gasket - 16038-024
- Seal - 92093-2069
- Seal - 92093-2082
- Gasket-carburetor - 11060-2339
- Seal-oil - 92049-2096
- Seal-oil - 92049-2227
- Spark Plug - BPR5ES
- Gasket-air Filter - 11009-2505
- Element-air Filter - 11013-2109
- Tube-5x8x100 - 92190-2011
- Gasket-rocker Case - 11009-2433
- Element-air Filter - 11013-2141
- Gasket-muffler - 11060-2382
- Gasket-insulator - 11060-2340
- Gasket-intake Pipe - 11060-2341
- Gasket-crankcase Cover - 11060-2482
Replaced all oil gaskets and seals. Stopped all oil leaks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Oil leak around upper crankshaft seal
FRANK - August 29, 2018
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Wrench Set, Impact wrench
Parts Used
Removed everything from top of engine to include flywheel and magnets. Removed old seal by drilling a small hole in it, inserting a metal screw and pulling the seal out with pliers. Installed new oil seal, reassembled top of engine and problem solved, No leak.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Governor shaft seal leaking, replaced 1 valve cover gasket, replaced o ring on oil dipstick tube as prevention
Robert - July 20, 2018
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
1. Removed governor arm with wrench to loosen bolt
2. Spread arm with regular screw driver
3. Removed arm from shaft
4. With small but sturdy regular screw driver I slid it down governor shot into seal and prying carefully not to get anything but the seal.
5. Clean shaft and surrounding area with clean dry rag.
6. Using deep well socket tapped new seal in place
7. Replaced governor arm.
Did NOT have to remove intake, not in the way.
2. Spread arm with regular screw driver
3. Removed arm from shaft
4. With small but sturdy regular screw driver I slid it down governor shot into seal and prying carefully not to get anything but the seal.
5. Clean shaft and surrounding area with clean dry rag.
6. Using deep well socket tapped new seal in place
7. Replaced governor arm.
Did NOT have to remove intake, not in the way.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
