fancyboxy
eReplacementParts.com
866-322-9842
Skil Parts
Repair Parts Home  Power Tool Parts  Skil Parts  2610321608 On-Off Trigger Switch

On-Off Trigger Switch

Part Number: 2610321608
SkilBosch
Availability: 25+ in stock
Price: $12.68
Quantity:
Ships within 1 business day
Product Information
Manufacturer: Skil, Bosch
Product Number: 2610321608
Classification: Part
Weight: 0.04 lbs.
Shipping: Ships Worldwide
Specifications
  • Wiring Diagram is included
Description:
This Trigger type switch has 4 internal terminals. Included are 4 screws. This genuine Skil replacement part is sold individually.

Switches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are:
  • The tool has completely stopped functioning
  • it will not turn on.
  • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won’t turn on at all.
  • The variable speed function and electric braking aren’t working properly.
  • Compatibility

    This part is compatible with the following machines:

    Skil
    Bosch

    Products Compatibility

    This item works with the following types of products:

    • • Circular Saw
    • • Saw
    Questions & Answers

    I have a 5480 skilsaw. The blade shaft is not firm, it comes out and enters two millimeters, is it normal?
    Carlos for model number 5480 skilsaw
    Hi Carlos, Thank you for your question. One of the bearings may be causing the issue. Check for play in the bearing flange. If that is okay, then check the bearing sleeve. If it is the armature that is damaged then you may need a new saw. I hope this helps. Thank you and have a great day!
    Can you give me a number part for the bearing flange and sleeve, please. My Skilsaw don't have a bering maybe my technical staff remplace for copper bushing. I'll Wait your answer
    Carlos for model number 5480 Skilsaw
    Hi Carlos, thank you for your question. I have listed your bearing plate down below for your. I hope that helps. Good luck with your repair.
    Hi, Is this switch variable speed? Use in a Black and Decker recp saw. Thanks
    Jay
    Hello Jay, Thank you for the question. Yes, the switch is variable speed. In order for us to locate the correct parts for your saw, we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
    I have a very old all metal round case Skilsaw Model 77 which has a metal trigger assembly. It stuck "on" and I would love to find an original replacement switch. I tried to replace it with the plastic switch but the wiring is different. My breaker trips when I pull the trigger. If I cant find an original replacement, can I make this plastic switch work?
    Carl Virden for model number 77
    Hello Carl, thank you for inquiring. Yes, this On-Off trigger Switch part 2610321608 will fit your model.
    Can I get a switch from a store in my home town Tacoma Wa 98387
    LARRY
    Hi Larry, Thank you for your question. You may be able to get a trigger switch from a store in your area. You will need to check online for stores in your area that has the part available. I hope this helps. Thank you and have a great day!
    Repair Instructions: Submitted by Customers Like You
    4 of 4 people found this instruction helpful
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Auxiliary Handle - 1619X01422
    Repair Difficulty:
    Medium
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    Screwdriver, hex wrench
    Trigger switch and handle broken
    Bought parts for Model 77 skill saw since the original parts for Model 367 Skil saw were no longer listed as available. The poles on trigger switch were reversed from original and after first attempt and "reading" the instructions it was obvious to correctly rewire and repair. The handle fit with just a little extra pressure all works fine now.

    Thanks, Ken
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    5 of 6 people found this instruction helpful
    Tool Type:
    Circular Saw
    Parts Used:
    Screw - 2610315299
    Screw - 2610315380
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    Screwdriver
    Bad switch and missing screws
    Remove the right handle half from the saw. Make a wiring diagram if you like to. Remove the wires from the switch and remove the switch and cord relief. Connect the wires to the new switch and attach the switch to the handle. Install the cord relief. Then screw the handle half to the saw.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    2 of 2 people found this instruction helpful
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Medium
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    Screwdriver, Star Drive screw driver
    Old switch would not turn off. Saw just kept running.
    Took handle apart and replaced switch. The switch screws to connect power and load were located on a different side of replacement switch. A quick call to replacement parts clarified this change. Then I had to buy new wire ring terminals for the power cord to get correct length so wire would fit in handle. That caused some difficulty as I had to file them smaller to fit the switch connection area. All now works well.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    2 of 2 people found this instruction helpful
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Hard
    Time Spent Repairing:
    1-2 hours
    Tools Used:
    Screwdriver, Dremel tool, wire sriper and crimper
    On off switch was stuck on
    I had a good skill circular saw that was about 35 years old. Skill no longer sells the parts. I looked at the ereplacementparts online list and found a switch that looked very similar. The switch fit in perfectly after I ground down a piece of plastic that was about twice the thickness of the original. The wiring hooked up differently so I had to make a couple of the existing wires a bit longer. Saw works like new now.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    1 of 1 people found this instruction helpful
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    Screwdriver, A torx set.
    The on/off switch was worn out. It wouldn't turn off(stuck on)
    The new switch was the same dimensions but the wiring lugs we're in a different location. I was able to re rout the wires to make them reach. It was fairly simple, only took about 15 minutes and is good as new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Circular Saw
    Parts Used:
    Screw - 2610315380
    On-Off Trigger Switch - 2610321608
    Cord Guard - 1619X08308
    Locking Lever - 1619X01235
    Bearing Tub - WH2X1198
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    Screwdriver, Torks tip screw driver
    Table bent after dropping saw. Handle cracked. Trigger was not working correctly causing a safety issue.
    Unscrew handle halves. Remove screws holding handle to saw and remove. Unscrew wires to trigger and remove. Screw handle half to saw that holds trigger. Install trigger wires to new switch and install into handle. Tuck in the wires as not to get pinched and install second half of handle and screw together. Install screws to a fix handle to saw. Table or foot repair starts with removing depth adjustment screw by removing retaining clip then handle and increasing nut. Remove nut at front of saw at the table. Remove table. Position table onto saw body and screw front screw and nut. Position rear adjustment arch into threaded stud and replace nut. Adjust the nut so the Table can go up and down. Position the lever so down is tight and up loosens enough to adjust depth. Install keeper e clip. On old table remove adjustment nut and install on new table. Just reverse the process to install. Done. Now the saw will cut square and the honey dos will go easy.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    Screwdriver, Pliers
    Saw stayed on all the time
    Removed handle installed new switch, made electrical connections and reinstalled handle
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    30-60 minutes
    Tools Used:
    Screwdriver
    Trigger switch for worm drive Skil saw sticking
    I have Had this saw for over 25 years I didn't think I would be able to find a new trigger. Then I found.eReplacement parts.com gave them the model number and they came up with the correct one the first time at a very affordable price. When it arrived it was perfect. I removed the old trigger and installed the new one and now my saw is as good as new. Roger, Clarkston WA
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Cord Guard - 1619X08308
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    , Allen wrench
    Start switch and cord strain relief broken
    1). Used allen wrench to remove handle from saw body and separate into two halves
    2). Used smaller allen wrench to unfasten start switch from housing
    3). Used screwdriver to remove wires from start switch. Replacement switch though similar ran wires in slightly different pattern. Used ohm meter to verify correct contacts.
    4). Old cord strain relief was removed and new one inserted and clamped to original mount using screwdriver.
    5). Wires were reattached to new switch and then reattached switch to handle housing using Allen wrench.
    6). Handle housing halves were reattached to each other and inserted into saw frame. All mounting screws were reinstalled.
    7). Tested saw for running mode . Saw ran correctly and then installed new saw blade.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Circular Saw
    Parts Used:
    On-Off Trigger Switch - 2610321608
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    Screwdriver
    Switch broke.
    Removed the handle cover and replaced the switch.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Reviews
    1
    Average Rating (out of 5):
    1 Reviews
    Click to filter by ratings:
    5 stars
    0
    4 stars
    0
    3 stars
    0
    2 stars
    0
    1 stars
    1
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
  • To long to receive my part
    It is taking to long to get my part almost two months and still no part
    iGlobal - 6 days ago Verified Purchase
    eReplacementParts Team
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Skil, Bosch
    Product Number: 2610321608
    Classification: Part
    Weight: 0.04 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Watch the Repair Video for On-Off Trigger Switch
    How to Replace the Switch on a Skilsaw Worm-Drive Saw
    Articles:
    How to Wire the Switch on the Skil HD77 Worm Drive Saw
    The article explains the new wiring configuration for the Skill HD77 updated power switch. ...
    September 18, 2009
    How to Replace the Switch on a Skilsaw Worm-Drive Saw
    Step-by-step instructions for removing and installing the switch on your Skilsaw...
    October 09, 2017
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal