eReplacementParts.com
877-346-4814
Razor Parts
Repair Parts Home  Outdoor Recreation Parts  Razor Parts  W13112445101 On/Off Switch W/Light Indicator
photo thumbnailphoto thumbnailphoto thumbnailphoto thumbnail360 degree photo thumbnail

On/​Off Switch W/​Light Indicator

Part Number: W13112445101
Razor
Availability: Special Order [ more info ]
Price: $6.97
Leaves our warehouse within
13 - 19 business days.

*This part replaces obsolete part #: W151250011101 and W13111290101.

Product Information
Manufacturer: Razor
Product Number: W13112445101
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This replacement switch is specially designed for use with Razor equipment. This is the switch used to turn the unit on and off. This switch has a light indicator built in the button making it easier to see. Please note this plastic switch is sold individually.

Replacing this item is easy and does not require any tools

• Unplug the wires from the old switch
• Pull out the old switch by pushing on side tabs
• Secure new switch in place
• Connect the wires and test the unit
Products Compatibility

This item works with the following types of products:

  • • Motorcycle
  • • Scooter
Questions & Answers

is there only one model of razor pocket rocket mod, where can i find model/serial number
gary for model number inknown asked on 2019-10-27
Hello Gary, Thank you for the question. Sadly, we do not have any information on how to find the model number. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Scooter
Parts Used:
On/Off Switch W/Light Indicator - W13112445101
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
On/off switch was broken
1. Removed base of scooter cover by removing 6 Phillips screws.
2. Disconnected battery harness plug.
3. Removed 2 Phillips screws securing battery's hold down brace.
4. Lifted one of the batteries from the base and rested it out of the way in order to access the wiring for the switch.
5. Disconnected the 3 electrical leads that were connected to existing on/off switch.
6. Pulled the broken switch out of scooter.
7. Snapped in new switch and reconnected electric leads
8. Reconnected battery harness and reassembled the unit.
9. The instructions included with the part were clearly written and very easy to follow.
10. The scooter now runs like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Scooter
Parts Used:
On/Off Switch W/Light Indicator - W13112445101
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Broken On/Off Switch
1. Removed six screws from top plate. (Two on end had nuts to hold with a wrench)
2. Removed bar protecting batteries
3. Pulled batteries out and set to side
4. Used pliers to pull three leads off On/Off switch
5. Cut away glue holding switch in place
6. Pry switch out with screwdriver
7. Reverse process with new switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Scooter
Parts Used:
On/Off Switch W/Light Indicator - W13112445101
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Scooter on/off switch broke
1. Removed cover on scooter.
2. Removed part after disconnecting battery.
3. Replaced part.
4. Replaced cover and charged scooter.
5. Runs great so far.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scooter
Parts Used:
Reset Button - W13111260112
Control Module, Chain Driven/ 7 Connector - W13111612015
On/Off Switch W/Light Indicator - W13112445101
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Scooter motor would not run. A clicking noise was heard when throttle was activated.
Repair was not successful..
Replaced module control, power switch and reset switch.
Will test motor next.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scooter
Parts Used:
On/Off Switch W/Light Indicator - W13112445101
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The on/off switch was damaged
I replaced the on/off switch. Very easy. Only 3 slip on wire connectors.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Scooter
Parts Used:
Reset Button - W13111260112
On/Off Switch W/Light Indicator - W13112445101
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Switch broken.
Removed and replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Switch
    Fit and worked perfectly
    Guest - May 12, 2020 Verified Purchase
    made a easy repair
    took a little than expected but fit perfect
    Guest - November 21, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Razor
    Product Number: W13112445101
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy