Switches are a commonly replaced part in power tools that handles on/off functions. This is a genuine OEM supplied replacement part that is specially designed for Bosch power tools. Because switches use mechanical internals, over time they will wear out and may begin to fail eventually requiring replacement. This on-off switch has a plastic body and it is sold individually.
On-off Switch 2607200260
OEM part for: Bosch
Part Number: 2607200260

7 - 12 business days


Compatibility
This On-off Switch will fit the following 28 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 28 matching models.
28 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Bosch
- Skil
This item works with the following types of products:
- Jig saw
- Planer
- Sander
- Saw
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.

Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for On-off Switch
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Switch not working
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Make a wiring diagram
Disconnect the wires from the old switch
Connect the wires to the new switch
Replace the handle half
Off/ on switch quite
Tool Type
Sander
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Air compressor, needle nose pliers
Parts Used
2. Seperate housing.
3. Use Air hose to clean housing and motor of dust, use a small brush to loosen any hard dust.
4. Loosen screws holding the feed conductors, armature, and field conductors.
5. Remove old switch and place new switch in recesses, attach conductors and reassemble housing, insert screws and tighten.
6. Test run, then put the sander to use.
On off switch broke
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Sander would not turn on.
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
2. Popped out the old on-off switch.
3. Removed wires from old on-off switch.
4. Attached same wires to new on-off switch.
5. Secured 2 wire with screws from old switch.
6. Replaced cover and it works again.
Sander stopped working and Hook & Loop pad was worn out.
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Star drive bit , wire stripper , crimping tool.
Remove old pad by taking out one bolt. remove old friction ring (note orientation and just pull it off ) install new ring and sanding pad in reverse order.
Test your repair and have fun ! I have a sander that's good as new.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.