eReplacementParts.com
877-346-4814
Milwaukee Parts
Repair Parts Home  Power Tool Parts  Milwaukee Parts  23-66-0645 On-off Switch

On-off Switch 23-66-0645

OEM part for: Milwaukee

Part Number: 23-66-0645


Install
Videos!
On-off Switch - 23-66-0645:Milwaukee 360 View
On-off Switch - 23-66-0645:MilwaukeeOn-off Switch - 23-66-0645:MilwaukeeOn-off Switch - 23-66-0645:MilwaukeeOn-off Switch - 23-66-0645:MilwaukeeOn-off Switch - 23-66-0645:MilwaukeeOn-off Switch - 23-66-0645:Milwaukee 360 View
$26.55
In Stock
Ships within 1 business day
Easy 15-30 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

This replacement switch is a genuine item that is sourced directly from original equipment manufacturer for a Milwaukee band saw. It is the component which allows user to turn the unit on and off. Over time the switch may develop either mechanical or electrical issues causing intermittent stalling and eventually a no-start condition, replacing the switch should resolve most of these issues. Please note this durable plastic body part is sold individually.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 1 machine

Milwaukee

6232-20 (D51A) Deep Cut Bandsaw View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Band Saw Parts
  • Saw Parts

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for On-off Switch


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 15-30 minutes (3 rated repairs)?

Switch was bad.

Clinton - May 1, 2017
👍 1 of 1 people found this instruction helpful
Tool Type

Band Saw

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

Screwdriver, Torx bits

Removed the handle plate, changed the switch. Tested, works well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Trigger stopped working

Dennis - October 14, 2018
Tool Type

Band Saw

Difficulty

Easy

Time

15-30 minutes

Tools Used

Screwdriver, Soldering iron ( 1 connection)

1 - Removed 1 side cover
2 - Replaced on/off switch & Pcb assembly(circuit board required 1 connection soldered).
3- Replaced cover & saw was working again.
4- Replaced Brushes & Blade pulley tires, as preventative maintenance.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Switch was bad

Mark - March 5, 2016
Tool Type

Band Saw

Difficulty

Easy

Time

15-30 minutes

Tools Used

, torx

Remove half of the handle, make a wiring diagram, remove the bad switch with very small screwdriver replace switch, make sure not to pinch any of the wires when putting the handle back together, boom your done
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal