Watch The
Repair Video

Nut-Keps

Part Number: 32149-2

Order within the next 7 hours

and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 915968 and 32142-2.

Product Information

Manufacturer: Toro, Lawn Boy

Product Number: 32149-2

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide

Description:

This part is available as an individual replacement. The nut-keps attaches to the lower bracket-housing. A wrench might be helpful during the installation of this part. This is made of metal and will require replacing if it breaks. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy snowthrowers.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Toro

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Snowblower

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Blower

Parts Used:

Screw-Carr - 3229-11

Nut-Keps - 32149-2

Scraper - 55-8760

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

worn out scraper blade

removed old blade, screws and nuts and replaced with new blade, bolts and nuts

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Lock Nut - 3296-56

Screw-Carr - 3229-11

Rotor Blade - 99-9313

Screw - 136-7182

Nut-Keps - 32149-2

Scraper - 55-8760

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Allen wrench

Rubber rotor blades were shot and so was front scraper so I replaced them both.

One rotor at time, however after pulling first rotor did the scraper bar.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Screw-Carr - 3229-11

Rotor Blade - 99-9313

Nut-Keps - 32149-2

Scraper - 55-8760

Belt - Drive - 55-9300

Repair Difficulty:

Hard

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Vise-Grips,Sheet metal bending pliers, Hammers & anvils

Snow Thrower: worn drive belt, worn and broken scraper blade, worn rubber impeller blades

1. Removed side panel cover over drive train
2. Removed and replaced Drive belt.
3. Removed Scraper Blade bracket
4. Removed old Scraper Blade
5. Straightened bottom panel on which scraper blade mounts (badly bent)
6. Installed new Scraper Blade
7. Removed and replaced Rubber Impeller Blades (This is the worst part. There is no access to side nuts without removing the impeller shaft, drive pulley, bearings,belt, etc. Use small needle-nose vise-grips to hold the nuts in place, AND hold the rubber blade to the impeller shaft frame while driving the Torx bolts with a power nut driver, and a Flex-extension on the driver).
8. Replaced Side panel.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Manufacturer: Toro, Lawn Boy

Product Number: 32149-2

Classification: Part

Weight: 0.01 lbs.

Shipping: Ships Worldwide