Nozzle E165000470
Part Number: E165000470
Order within the next 2 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 72935-63331.
Product Information
Description:
| This is an authentic Shindaiwa replacement part made for the blowers listed below. It fits on the end of the tube assembly, connected to the straight tube. To attach this part, align the straight tube’s lock pins with the nozzle tube’s lock slots, and push the tubes together; twist clockwise to lock. Sold individually. |
Compatibility
Products Compatibility
This item works with the following types of products:
- • Blower
Questions & Answers for Nozzle
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
The intake cover clips had broke. The tube end had broken and would not stay connected. The end tube was worn. These items were in need repair after 18 years of usage.
Pretty much self explanatory. The intake cover just snaps into place. The tube where the handle is connected only required an Allen wrench to remove the handle and put it back on the new tube. I used a socket to remove the clamp around the old tube to disassemble it. A Phillips head or a straight blade screwdriver could have been used on the clamp since it was slotted on mine. The tube slides into one end and tighten the clamp to hold it in place. The other end you just twist off and twist back onto the new piece and it locks in place. That's it and works as expected.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
