Product Information
Description:
| This is a genuine Senco replacement part, it is sold individually. The Contact Foot is attached to end of the safety assembly to prevent the material that it is being used on from getting marred or dented by the safety assembly. It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time. And get lost. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Non-marking Contact Pad
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 5 people found this instruction helpful
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Silicon adhesive
Tips from Brad nailers often go missing older nailers make it more difficult. Great to find the parts at e-replacement parts. Gluing them on with silicon keeps them in place.
I replaced the pads on three of my nail guns. Place a dab of silicon on the tool tip before replacing the no-mar tip. Make sure it cures before you use it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pad had to be replaced.
Removed the old pad and replaced with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
missing parts
pushed on new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, NONE
No instruction was needed
Removed worn or broken tip by slipping it off.
Replaced it by slipping a new tip on.
Replaced it by slipping a new tip on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools
nothing they were replacements for future jobs that i have planned
they just push on the nose of the tool to protect the wood from any marks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
No mar tip had been lost
The no mar tip merely pushes in place. I put some glue on it to keep it from coming off although it would not have been needed .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Allen wrenches
Damaged part needed replaced
The difficulty was figuring out to get the piece out, as in how much disassembly was necessary. Then it was even more difficult to figure out what order to out the parts back together. Then there is that trigger spring that just kind of sits in there. You need three hands to hold the parts while assembling.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Non mar pad missing
Simply press the new part on the nail gun.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Foot fell off
Pushed new foot on. I did epoxy so it won’t fall off in the future.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The no-mar tip of my finish nailer had dry rotted and I had to get a new one.
I replaced the tip, just pressed it on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
10 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
1
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Extremely easy and part arrived earlier than anticipated
The process was easy and the part came earlier than anticipated
Guest -
April 5, 2023
Verified Purchase
Replacing non-marking pads on Senco air nailers.
About three different non-marking pads for my senco air nailers and staple gun and they fit perfect. Intake long to receive them in the mail either. Thank you so much . Looking forward in the future to get more parts for different repairs.
Michael C -
December 6, 2022
Verified Purchase
Fit like it should
Out of the package on to the tool and away we go
Guest -
April 24, 2022
Verified Purchase
Replacement Parts had the part I needed. I have ordered from them before and will continue to look at them for future parts i need for repairs.
The part I ordered fit perfect.
Guest -
January 11, 2022
Verified Purchase
Perfict
Works great
Jason -
October 21, 2019
Verified Purchase
great
worked as expected
Guest -
September 10, 2019
Verified Purchase
Just what I needed, fit perfectly.
Only question or concern was that I though the shipping cost was a little high.
Guest -
June 12, 2019
Verified Purchase
perfect
fast shipping
Guest -
June 6, 2019
Verified Purchase
Part fit just right but shipping cost..wow!
Almost $6.00 to ship a tiny part that weighs almost nothing....seems insane to me.
Guest -
November 11, 2019
Verified Purchase
Wrong part
I purchased two of these. One for my stapler and one for my brad nailer. They were supposedly the right ones but they are way too small.
Aldon -
September 30, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
