Needle Valve Kit

1.removed the carb, replaced the fuel foot valve, removed the fast fuel jet, replaced. replaced the carb. intake gasget ,replaced governor spring, replace air cleaner element.
Removed old oil, place new oil in crank case,
Replace points that were locked tighted inplace, had to heat screws to remove, and the condenser screw had to be drilled out and retaped. Cleaned flywheel and coil to get a good spark.
replaced plunger and fly wheel key. Timed an set points .020
replaced spark plug and set to .o30. adjusted fast idle jet, edger now runs well and edges nicely. I'm out of room so have a nice day!

I never thought this part would still be available. It saved an otherwise perfectly good piece of equipment from being rendered useless. Simply installed the kit into the carburetor made a little adjustment. Started on the first pull and that doesn't happen on new equipment.