Watch The
Repair Video
Repair Video
Muffler Cover
Part Number: A320000650
Order within the next 14 hours
and your part ships today!*This part replaces obsolete part #: and 70102-15180.
Product Information
| Manufacturer: Shindaiwa |
| Product Number: A320000650 |
| Classification: Part |
| Weight: 0.09 lbs. |
| Shipping: Ships Worldwide |
Description:
| This is an original Shindaiwa replacement part manufactured for use with lawn and garden equipment. The muffler cover helps protect the user from the hot muffler, and prevents damage to the muffler. The cover is sold as an individual replacement part, please note the hardware used to fasten the cover is sold individually. |
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Trimmer
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, 90 Degree Allen head wrenches
Replacement of worn out OEM parts
Just make sure that all of your new parts are laid out separately, in order to allow you to keep everything separate from the old parts that you will be removing. Take your time, clean areas and parts that you will be keeping as you go. Once all parts have been removed and parts cleaned, work your way backwards from the way you removed parts when installing the new parts. I use 90 degree type Allen Head wrenches without handles that way I do not over tighten fasteners. I had gasket material that stuck on me around the intake portal to the piston that needed to be scrapped off, so I brought the piston to TDC and stuffed a small bit of rag in the hole to keep debris from getting inside the head.
I also bought from a local store a replacement muffler and muffler bolts and gasket that was installed during this time as well, but the store did not have the other parts I was needing.
EVERY part that I ordered from eReplacement Parts fit exactly as the old parts, I did not have to make any adjustments to the new parts to get them to fit.
When I was finished, I primed the carburetor, adjusted the choke and slid the on/off button to on, and pulled the cord one time and it fired right up. I adjusted the choke and set it down and let it idle as I put my tools up and cleaned up the area I was working in.
I am very happy with my whole experience dealing with eReplacement Parts. I will be ordering again from them.
I also bought from a local store a replacement muffler and muffler bolts and gasket that was installed during this time as well, but the store did not have the other parts I was needing.
EVERY part that I ordered from eReplacement Parts fit exactly as the old parts, I did not have to make any adjustments to the new parts to get them to fit.
When I was finished, I primed the carburetor, adjusted the choke and slid the on/off button to on, and pulled the cord one time and it fired right up. I adjusted the choke and set it down and let it idle as I put my tools up and cleaned up the area I was working in.
I am very happy with my whole experience dealing with eReplacement Parts. I will be ordering again from them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, allen wrench
Muffler mounting bolts came off causing muffler to melt the plastic cover
Removed damaged parts, then I added lock washers to the mounting bolts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
| Manufacturer: Shindaiwa |
| Product Number: A320000650 |
| Classification: Part |
| Weight: 0.09 lbs. |
| Shipping: Ships Worldwide |
Repair Guides
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Related Products
