Miter Saw Parts
Search By Model Number
Popular Parts
It has to be pressed to activate the power switch.
This is a very common replacement part. It is advised to order one or two extra to keep on hand.
This Makita switch button is compatible with the tools listed below, and it is not guaranteed to fit any other power tool models.
2 of the Kerf Boards are required on the tools listed below.
rnrnKerf boards (also called kerf plates) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf board for your tool can give a rough edge to the material you’re cutting.
This brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking
Carbon motor brushes are one of the most commonly replaced power tool components.
Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.
Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.
A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.
When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
It is used in various locations in the models shown below.
It helps fasten and hold different parts together.
This is a round-head phillips screw. Made of metal.
Includes two Carbon Brushes with wire lead attached.
• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Popular Machines
Browse Miter Saw Parts
Miter Saw Repair Articles
| How to Fix a 2-Cycle Engine Carburetor | How to Replace the Fuel Filters in Your Outdoor Power Equipment |
 |  |
| This article will walk you step-by-step through the process of repairing a 2-Cycle... | This article will help you troubleshoot your fuel-line replacement repairs.... |
